 |
| Item ID |
Short Description |
Product Type / Details |
#
|
Price |
Note |
Location |
| Make |
Model |
| |
|
$ |
|
 |
147927 |
"New" 10HP Blower, 1,724 CFM for aspiration gas recirculation |
in Blowers
|
2
|
|
|
|
RICHMOND, VA |
| |
"New" 10HP Blower, 1,724 CFM for aspiration gas recirculation
Performance:
1,724 CFM @ 15” S.P.W.G., 2760 RPM, 6.52 B.H.P.,0.029#/Cu.Ft. Air Density,
900°F Air Temp.
Motor Data:
Reliance 841XL ,10 H.P., VFD Duty, 1800 RPM, Mill & Chemical, Severe Duty,
Premium Efficiency,3/60/230-460 Volts
Process Conditions:
Inlet pressure into blower: +19"H2O +/- 2”H2O
Delta P generated by the blower: +14”H2O +/- 1”H2O
Process Fluid: Nitrogen
Start-up temperature cold: 400 deg.F
Operating Temperature: 900 deg. F
Flow at Operating Temperature 3,000 pph
Density at Operating Temperature: .0290 lbs/ft3
|
|
147996 |
Camfil Farr |
|
in Air Filters
|
2
|
|
10,000.00
|
 F* |
St. Louis, MO |
| |
Air Makeup Intake Unit
Special Air Makeup Intake Unit to handle 5200 cfm of exterior air.
304 Stainless Steel construction - with weather shield and insect screen - 3P Glide/Pack filter unit includes (3) each 30/30 pre-filters, Size 24 x 24 x 2; and (3) each Riga Flo final filters, Size 24 x 24 x 12 - 12" OD air outlet - (1) Photohelic gauge, 0-3" wc, mounted in a NEMA 4 weather-proof enclosure. |
|
151414 |
Gardner Denver |
|
in Blowers
|
1
|
|
|
|
St. Louis, MO |
| |
Blower / Sound Enclosure (80 DB)
8'-2" high x 6'-6" wide x 8'-10" long.
Enclosure frame is of powder-coated aluminum construction. Side access doors (both sides) - Blower discharge pipe opening - Air inlet with MERV8 filter - Greenheck Cube-121-5 exhaust fan, 460V, TEFC - Exhaust fan thermostat - Panel for transmitters & temp. switch & hardware to connect to blower. Was purchased for MAC E-finity pressure blower package, Size A, Model #526 - but never used. See Extended Description for drawing. |
|
133171 |
BryAir |
VFB-3-E-300 |
in Air Filters
|
1
|
|
8,000.00
|
F* |
Dunkirk, NY |
| |
BryAir Dehumidifier, VFB-3-E-300
BryAir Dehumidifier, 300 CFM, external static 1.50" w.c., Process CFM: 300; Process External Static: 1.50"w.c., React CFM: 100, React External Static: 0.75" w.c. Load KW Motors & Controls: 2.7
Reactivation is electric. Power input is 480 volt, 3 phase, 60 HZ. Heater input KW is 6.43. Max Output temp is 190 degrees F. ** NEVER USED ** |
|
122897 |
Cargocaire HC-1500SA Special Dehumifier |
in Heating, Ventilating and Air Conditioning Eq
|
1
|
|
|
|
Memphis, TN |
| |
Cargocaire HC-1500SA Special Dehumifier
Cargocaire HC-1500SA Special Dehumifier, purchased 1976. See attached pdf for technical data. |
|
141356 |
Mac |
|
in Air Moving & Blowing Equipment
|
1
|
|
40,000.00
|
F* |
St. Joseph, MO |
| |
Centrifugal Blower Fan
30,000 CFM - Series 8800 - Size 3650 - Class RTF
Static Pressure: 30" WC - BHP: 184.53 - Speed: 2,443 RPM - Design # 8812 - Rotation & Discharge: CW-TH - Scroll & Cheek Liner: UHMW 3/16" thick - With 200 HP Motor - 1800 RPM - See Extended Description for drawing. |
|
97730 |
Chester-Jensen |
XB-15-OT-15-32 |
in Heating, Ventilating and Air Conditioning Eq
|
1
|
|
42,500.00
|
|
Jonesboro, AR |
| |
Chester-Jensen 15 Ton Plate Chiller
15 Ton |
|
97732 |
Chester-Jensen |
XB-30-OT-15-32 |
in Heating, Ventilating and Air Conditioning Eq
|
1
|
|
56,500.00
|
|
Jonesboro, AR |
| |
Chester-Jensen 30 Ton Plate Chiller
30 Ton
Missing 1 plate |
|
148118 |
Cleaver Brooks |
CB700-150 |
in Boilers
|
1
|
|
|
F* |
Fort Smith, AR |
| |
Cleaver Brooks Gas Boiler
This boiler was only operating for six months before being idled. It was hydro tested in April 2012 and passed the test. |
|
127130 |
Cooling Tower, capacity: 1200 gpm, crossflow type |
in Heating, Ventilating and Air Conditioning Eq
|
1
|
|
|
|
Washington, WV |
| |
Cooling Tower, capacity: 1200 gpm, crossflow type
Manufacturer: BAC
Packaged, single cell, induced draft, crossflow-type, steel cooling tower with variable frequency drive. 20 HP
Dimensions: 9' x 12' x 10' high (plus 3'-6" high base)
Capacity: 1200 gpm, Wet bulb temp: 78 degF |
|
136822 |
Marley |
NC621 |
in Process Heating and Cooling Equipment
|
1
|
|
|
F* |
VALDOSTA, GA |
| |
Cooling Tower; Marley NC Series
Serial # NC621 3-1065-91
Available in Valdosta, GA |
|
147932 |
Mac |
CT-60 |
in Dust Collectors
|
1
|
|
9,500.00
|
|
St. Louis, MO |
| |
CT Cyclone Collector
Model CT-60 - Serial # 132252-018-2
12 ga. 304 Stainless Steel construction - CW rotation - 12" OD plain end inlet connection - 14" OD plain end exhaust connection - Product discharge flanged to mate to a MAC MD260 rotary airlock - (4) Gusset style mount pads - Access door in cone with proximity safety switch. |
|
120525 |
Donaldson Torit Dust Collector / vacuum system, Model TD-573 |
in Dust Collectors
|
1
|
|
|
|
Richmond, VA |
| |
Donaldson Torit Dust Collector / vacuum system, Model TD-573
Torit Dust Collector / vacuum system, Model TD-573
Torit MODEL TD-573, 800 ICFM, 3600 RPM MTR, 480VAC, 25HP PURCHASED IN NOV 1999, RATED -220 IN WC,WITH SILENCER. The blower associated with the unit is not working due to a bearing failure. |
|
87534 |
Exhaust Cyclone |
in Heating, Ventilating and Air Conditioning Eq
|
1
|
|
|
|
Washington, WV |
| |
Exhaust Cyclone
Flex Kleen; 20,000 AFCM; 225 F; 5'10" OD x 28'4" Height |
|
110826 |
Fan Blower (overhead) by Buffalo Forge |
in Air Moving & Blowing Equipment
|
1
|
|
|
|
RICHMOND, VA |
| |
Fan Blower (overhead) by Buffalo Forge
Buffalo Forge centrifugal fan blower model 25-FRP-MW
Buffalo Forge centrifugal fan blower (overhead); model 25-FRP-MW; serial number: 86306315 |
|
110827 |
Fan Blower by NY Blower |
in Air Moving & Blowing Equipment
|
1
|
|
|
|
Richmond, VA |
| |
Fan Blower by NY Blower
NY Blower centrifugal fan blower; model C-1639-100
NY Blower centrifugal fan blower; model C-1639-100; serial number LANC-3810 |
|
91274 |
Greenheck |
VABS-36F14-1-2 |
in Air Moving & Blowing Equipment
|
1
|
|
2,000.00
|
F* |
St. Louis, MO |
| |
Greenheck Ceiling Mounted Static Pressure Fan, 72" dia
Class 1, Max class FRPM 1719, arrangement 9 - with 2 HP motor, ODP enclosure, 1725 RPM
Pitch has been factory set at 20 degrees |
|
150261 |
York |
|
in Heating, Ventilating and Air Conditioning Eq
|
2
|
|
|
|
Moncks Corner, SC |
| |
Heat pump, mfg. by York
100,000 BTU
Model: SP102E09S4DZZ40001A, R-410A refrigerant, POE oil, |
|
136878 |
Kice |
CKS-C54 |
in Dust Collectors
|
1
|
|
9,000.00
|
F* |
St. Louis, MO |
| |
Kice Cyclone
Model CKS-C54 - 54" dia. x 126" long (150" OAL with flange)
Upper barrel cyclone collector - 10 GA 304L stainless steel - exterior flanges of mild steel - inlet transition to 12" OD - clean air outlet with vertical air discharge reduced to 12" OD with straightening vanes. Stock outlet to mate 15" OD with floating flange to VB0ST24x15 airlock. (Airlock not available.) Hinged inspection door mounted 24" below the flange connecting the upper barrel and top of cone. |
|
148936 |
Kice |
CKS-C54 |
in Dust Collectors
|
1
|
|
11,000.00
|
F* |
St. Louis, MO |
| |
Kice Cyclone - Model CKS-C54
Upper Barrel - Cyclone Collector
10 GA 304L Stainless Steel - Exterior flanges of mild steel - inlet transition to 12" O.D. - Clean air outlet with vertical air discharged reduced to 12" O.D. with straightening vanes. Cone, Cyclone Collector, CKS-C54, 12 GA 304L S.S. Exterior flanges of mild steel - stock outlet to mate 15" O.D. with floating flange to mate VBOST24X15 Airlock. Hinged inspection door mounted 24" below the flange connecting the upper barrel and top of the cone. Includes Kice Rotary Valve, Model V-BOST24X15 Heavy Duty Rotary Airlock with 1.5 HP motor. |
|
141354 |
Mac |
55AVRC21 |
in Dust Collectors
|
1
|
|
|
F* |
St. Louis, MO |
| |
MAC Air Vent Filter / Dust Collection System
Model 55AVRC21, Style III
1,075 sq. ft. of media with an air to media ratio of 1.9:1 @ 2,000 CFM - Filter stressed for 40" WC - 12 ga carbon steel construction - Food grade hinged housing access door - (21) Polipleet filter elements, bottom load style - Flanged 10" dia radial inlet. With MAC MD40 Airlock, 8-vane, open end rotor. Includes New York Blower Fan, Wheel Size 224DDH, Series 20 GI, 2,000 CFM, 2106 RPM, CW Rotation, with 7.5 HP Motor. |
|
148886 |
Mac |
520 |
in Blowers
|
1
|
|
|
|
MEMPHIS, TN |
| |
Mac Blower Package Model 520
Mac Blower Package Model 520
6o horse power
serial # 500409
Positive displacement blower
• Table top base (painted)
• Adjustable motor base
• V-belt drive
• OSHA standard drive guard
• Relief valve
• Check valve
• Inter-connecting hardware
• Discharge silencer (absorptive type)
• Combination inlet filter/silencer
• Pressure gauge
• All blowers are rated for 15 PSI maximum
• All blower volumes are based on standard
inlet conditions (14.7 PSIA, 70\ F) |
|
156073 |
Mac |
19 RTC 3 - Style II |
in Dust Collectors
|
1
|
|
|
|
Fairburn, GA |
| |
MAC Dust Collector
Model 19 RTC 3 - Style II - Up to 75 CFM
2.6:1 Air to cloth ratio - Filter stressed for 17" Hg - 304 stainless steel construction (all product contact parts) - 304 stainless steel clean air plenum - Top load style Polipleet filter elements, good for maximum 200 deg. F operating temperature - with Dustronix digital differential pressure gauge/switch/transmitter, side mounted #9 stainless steel fan with aluminum wheel and stainless steel blast gate and 1/2 HP, TEFC 3/60/460 volt, 3600 RPM Motor - 2" OD stub inlet. Complete with Alfa Laval 6" Butterfly Valve, low-range pressure sensors and spare filters. |
|
133002 |
Mac |
CT21 |
in Dust Collectors
|
1
|
|
4,000.00
|
|
St. Louis, MO |
| |
MAC Stainless Steel Cyclone with Airlock
Model CT21 - 57" OAH - with Mac Multi-Duty Rotary Airlock - Model MD40 (carbon steel)
with Conical Top Design and Body Section Flanged to Cone - 12 ga. stainless steel construction, CW rotation, 4" OD inlet connection, 5" OD exhaust connection - Product discharge flanged to mate to MD-40 arlock - 304 stainless steel draw-thru connection - (4) gusset style mount pads - Bindicator level indicator - 8" bolted inspection opening. See extended description for additional information. |
|
150631 |
New York Blower |
Series 20 GI |
in Air Moving & Blowing Equipment
|
1
|
|
|
|
Davenport, IA |
| |
NY Blower Fan
Series 20 GI - Size 194
DH Wheel, arrangement 9E, Rotation CW, Discharge UB, 2000 CFM, 12" WG, 2503 RPM, 5.8 BHP at 70 deg F and 500' - 0.0737 lbs./cu. ft. With 15 HP motor, 1800 RPM and VFD, Severe Duty, 213T frame, 460V, 3 phase, 60 HZ. Outlet flange, inlet flange - manual outlet damper. |
|
138594 |
NY Blower: 4000cfm, size 18, |
in Blowers
|
1
|
|
|
F* |
Moncks Corner, SC |
| |
NY Blower: 4000cfm, size 18,
Manufacturer: New York Blower. RPM: 1559, Total fan weight: 449 lbs.
Max. safe speed: 2732, SP: 2.25, with 3hp Reliance Motor: 1800 rpm. |
|
133396 |
Reznor PCDH 100 |
in Heating, Ventilating and Air Conditioning Eq
|
1
|
|
|
F* |
Oakley , CA |
| |
Reznor PCDH 100
Natural Gas furnace serial number 09087238A
CFM 14,250, 480volt 3 phase |
|
155890 |
Rupp Industries |
DCU230 |
in Heating, Ventilating and Air Conditioning Eq
|
3
|
|
|
F* |
Oklahoma City, OK |
| |
Rupp Industries Make Up Air Units - Available ~ Sept. 2013
(Temp Air Division) Model DCU230
With 30 HP Fans - Rated for 4.32mm BTU's - Temp Rise = 80 degrees F - Serial #D23095-136; 137; 138 |
|
157254 |
Rychiger Chillers - Available August, 2013 |
in Heating, Ventilating and Air Conditioning Eq
|
2
|
|
|
N* |
St. Joseph, MO |
| |
Rychiger Chillers - Available August, 2013
Type TW 28HGZ, 460 volt, Kw 3.2, 25 degrees C, 60 HZ, 23 amps, 4.2 Kg |
|
134686 |
Trane |
|
in Heating, Ventilating and Air Conditioning Eq
|
1
|
|
|
|
Crete, NE |
| |
Trane Roof Top Air Conditioner - 7.5 Ton
Model #TSC092A3R0ADV00000000A600 - Serial #321100929L
With (2) compressors - Unit size is approx. 4.5' x 7.5' - weight is approx. 1500 lbs. Blower capacity is 3,000 cfm. Unit uses R22 refrigerant. Roof curb not available.
|
|
125953 |
Donaldson Torit |
C40-3K10 |
in Dust Collectors
|
1
|
|
|
|
Sudsbury, England |
| |
Used Donaldson Torit DCE Model: C40-3K10
Donaldson Torit DCE Model: C40-3K10, S/N 0025572, 400V 3~ 50Hz, 5.5kW MOTOR, Weight: 1247 Kg., Year of Manufacture 2007, filtration area = 40m3, uses 10 filter elements |
|
|
ALL CATEGORIES 
View 
when document attached
Group Offers into sub-categories 
Blowers - Other