| Item ID |
Short Description |
Product Type / Details |
#
|
Price |
Note |
Location |
| Make |
Model |
| |
|
$ |
|
 |
141142 |
(4) Used Dok Loc |
in Materials Handling and Storage Equipment
|
4
|
|
|
 F* |
Wilmington, DE |
| |
(4) Used Dok Loc
Vehicle Restraint's
Sold as Lot of Idividually |
|
90710 |
Unknown |
Rabbit Ear |
in Conveyors
|
1
|
|
1,500.00
|
F* |
St. Louis, MO |
| |
18" Wide x 8-1/2' Long Rabbit Ear Belt Conveyor
31" Overall width x 3' high - with stainless steel frame - less drive |
|
157264 |
Alvey |
300 |
in Materials Handling and Storage Equipment
|
1
|
|
5,000.00
|
N* |
Fort Smith, AR |
| |
Alvey 300 Palletizer
Will accept best offer. |
|
127745 |
Alvey |
880 |
in Materials Handling and Storage Equipment
|
1
|
|
120,000.00
|
|
Guelph, ON |
| |
Alvey Palletizer Series 880
2004 yr of mfg. Good condition. Running when removed from operation. Left handed operating model. Now idled at Guelph. Planned for late 2013 transfer to NPFC. |
|
152957 |
Swisslog |
Cartura DDDS |
in Materials Handling and Storage Equipment
|
3
|
|
|
|
Waverly, IA |
| |
Automated Guided Vehicles (AGVs)
Includes AGV battery charging station |
|
156395 |
Marchant Schmidt |
|
in Conveyors
|
1
|
|
|
N* |
Dunkirk, NY |
| |
Belt Conveyor - 22'-3-1/2" long
with Advanced Illumination Dual Lane Vision System |
|
137958 |
Big Joe |
PBC30-106 |
in Forklifts and Accessories
|
1
|
|
|
|
WASHINGTON, WV |
| |
BIG JOE PBC30-106 WALKIE STACKER
BIG JOE PBC30-106 WALKIE STACKER, s/n 334052, WALK BEHIND LIFT 3000LB CAP. NO CHARGER POOR CONDITION, BATTERY DEAD NO CHARGER. |
|
138976 |
Bonded |
B64A18 |
in Materials Handling and Storage Equipment
|
1
|
|
30,000.00
|
|
MEMPHIS, TN |
| |
Bonded Machine Company Bucket Elevator
Centrififugal Discharge on Belt Model B64A18 |
|
147899 |
Shorty |
310 |
in Materials Handling and Storage Equipment
|
1
|
|
|
F* |
Hayward, CA |
| |
Cart Caddy Shorty 310
Serial# 302733. On board battery charger |
|
141076 |
Clark model VST30 Forklift |
in Forklifts and Accessories
|
1
|
|
|
|
MANATI, PR |
| |
Clark model VST30 Forklift
This unit is located in San Juan, Puerto Rico
Clark model VST30 Forklift, Serial Number: VST2450090PM6242, Weight (note estimated/actual): 7,020 |
|
138988 |
Columbian Tec Tank |
|
in Materials Handling and Storage Equipment
|
1
|
|
18,000.00
|
|
Bloomfield, MO |
| |
Columbian Mass Flo Tec Tank Bin / Bin Vent
10'-2" dia x 47'-4" tall - Capacity 2860
With Kistler-Morse load cells with scale read-out. S.O. #04-0044 |
|
110474 |
Commercial Mfg Supp |
Incline Conveyor |
in Conveyors
|
1
|
|
5,000.00
|
F* |
Danville, VA |
| |
Commercial Mfg supply co Incline conveyor
Commercial Mfg supply co Incline conveyor, Interlox approx W 13' - 14' (330 - 356 mm) x L 15' (4'570 mm)
Commercial Mfg supply co Incline conveyor, Interlox approx W 13' - 14' (330 - 356 mm) x L 15' (4'570 mm) |
|
91571 |
Conveyor Plus |
|
in Conveyors
|
1
|
|
3,000.00
|
F*R* |
St. Louis, MO |
| |
Conveyor Plus Bag Knockdown Convyeyor, 12" wide x 13' long
Flex top belt - OAH 69" - discharge 25-1/2" wide interlocking belt x 45" long, OAW 31-1/2"
Bags will enter upright from the left and move toward the right with side gussets leading. The face panels of the bags will be facing you. The reciprocating kicker kicks the bottoms of the bags toward you. The bags will discharge toward you, lying flat on item #14212 (see photo). The discharge end of #14212 is at a fixed elevation. The entire flex-top conveyor (#14213 in photo) can be easily raised or lowered for various bag heights. The kicker was originally electrically-actuated however it was converted to an air cylinder after installed. |
|
143568 |
Weyerhaeuser Spacekr |
|
in Materials Handling and Storage Equipment
|
1
|
|
4,500.00
|
F* |
Hager City, WI |
| |
Corrugated Liquid Bulk Totes - 110 Gallon Capacity
Size: 37.75" x 37.75" x 19.75" (ID).Complies with USFDA and Kosher requirements for food contact - Max fill temp: 170 degrees F -Quantity: (95) Cassettes; (97) Bladders; (107) Caps.
Style: Die Cut Container - Material: 8 plies - Liners: 69 lb Mediums: 33 lb A Flute Inner ply: 180 lb (90/90 laminate) - 2 Bottom enclosures per container - Internal load limit = 1850 lbs. - Strapping: 0.625" Polyester, 0.030" thickness, 1100 lb tensile - (4) straps, (2) each way. Bladder: Polyethylene Bulk Liquid Bag - Size: 58" x 58" ID, seal to seal - Material: 3 ply construction (inside-outside): 4 mils Octene LLDPE/4 mils Octene LLDPE/4.6 mil Octene LLDPE. Cassette is 37.5" - Material: 350 lb B/C double wall - Caps (1) per unit -64.5" x 51.875" See Extended Description for spec sheet. |
|
111241 |
Cyclonaire HV-75 Bulk Conveyor System |
in Conveyors
|
1
|
|
|
F* |
Memphis, TN |
| |
Cyclonaire HV-75 Bulk Conveyor System
Cyclonaire HV-75 Bulk Conveyor System, 8" inlet, 8" outlet cs, s/n HV-75-2659, vacuum hose adapter 8"x20' long, railpan 24"x42"-8" outlet alum., Yard trailer cs. volume cu. ft. 75, air inlet 8, material inlet 6, discharge 8, ~weight 1550. Overall Width: Outside of tire to Outside of tire = 88"
Height can be reduced approximately 8" if wheels are removed.
Height can be reduced approximately another 12" with the top piping connection removed.
The manhole cover for the tank is missing. Also some of the controller components are missing from the unit. More pdf files are available |
|
137987 |
Deamco |
VCNF-F-18X8X9-6 |
in Conveyors
|
1
|
|
15,000.00
|
|
St. Louis, MO |
| |
Deamco Screener Conveyor
Vibratory Conveyor/Feeder - Model VCNF-F-18X8X9-6
Stainless Steel Pan Width = 18" - Overall width = 35" - Overall length = 116" - Overall height = 38" - Floor mounted - 240/480 volt, 3 phase, 60 HZ. |
|
93133 |
Eriez |
HS 36 |
in Feeders
|
1
|
|
3,000.00
|
F* |
London, ON |
| |
Eriez, Vibratory Feed Hopper
Eriez Vibratory FeederUsed to feed Chips, Nuts and other Small Items, Model HS 36 |
|
135812 |
Fanuc |
M-420iA |
in Materials Handling and Storage Equipment
|
1
|
|
25,000.00
|
|
St. Louis, MO |
| |
Fanuc Robot - Model M-420iA
For high-speed packing and material handling solutions. Type A05B-1040-B201 - NO. R04942401
Four-axis, modular construction, electric servo-driven robot - designed for a payload of 40 kg. Large work envelope with 1855 mm horizontal reach - repeatability of +/- 0.5 mm at full speed and full payload within entire work envelope. Linear motion speeds up to 4200 mm/sec. With Teach Pendant Robot Controller. See Extended Description for additonal details and drawing. No hour meter. |
|
142886 |
Feed screw conveying system with 12" feed screws |
in Conveyors
|
1
|
|
|
|
Richmond, VA |
| |
Feed screw conveying system with 12" feed screws
(2) 16 feet long x 12" screws
Includes Allen Bradley variable speed controller: model 1336 Plus. Installed in 2000. |
|
141457 |
FN Smith |
Intralox Cleated Belt |
in Conveyors
|
1
|
|
10,000.00
|
|
Dunkirk, NY |
| |
FN Smith Plastic Cleated Belt Conveyor
Intralox 18" wide 800 Flattop flush edge x 27'-1-3/4" OAL.
White polypropylene belt - with 3" scoop flight on 12" spacing, 2" indent side guards, 3" high on 1.3" indents. 304 Stainless steel frame with UHMW belt supports, adjustable footpads. Process Data: treats product at a rate of 4,800 lbs./hr - Density: 45 lbs./cu. ft. With 3 HP Washdown Motor, 480 VAC, 60 HZ, 3 phase. See Extended Description for Drawing. |
|
91608 |
Fox Venturi |
|
in Conveyors
|
1
|
|
800.00
|
R* |
St. Louis, MO |
| |
Fox Venturi 8" x 10" Eductor
With deflector plate to convey 18,000 lbs/hr of wet by-products (35 pcf, 1/4" to 1/2" particle) over a distance of 221' (horizontally), 15' (vertically) with (4) 90 degree LR elbows.
Motive air: from P-D Blower - 1500 SCFM at 7-8 psig - Convey line size: 8" SCH 10 pipe. Motive: 4" male NPT - Suction: 10" 150 lb pattern - 1/2" thick plate flange - Discharge: 8" 150 lb pattern - 1/2" thick plate flange. |
|
91609 |
Fox Venturi |
|
in Conveyors
|
1
|
|
800.00
|
R* |
St. Louis, MO |
| |
Fox Venturi 8" x 10" Eductor
With deflector plate to convey 18,000 lbs/hr of wet by-products (35 pcf, 1/4" to 1/2" particle) over a distance of 221' (horizontally), 15' (vertically) with (4) 90 degree LR elbows.
Motive air: from P-D Blower - 1500 SCFM at 7-8 psig - Convey line size: 8" SCH 10 pipe. Motive: 4" male NPT - Suction: 10" 150 lb pattern - 1/2" thick plate flange - Discharge: 8" 150 lb pattern - 1/2" thick plate flange. |
|
114968 |
Roach |
|
in Roller Conveyors
|
1
|
|
1,500.00
|
F*R* |
St. Louis, MO |
| |
Full Pallet Conveyor
64" Long x 62" Wide (51" inside) x 22" High with 3/4HP 1750rpm motor.
Used to transport full pallets of finished product to warehouse. |
|
157113 |
Flexicon Corp |
|
in Materials Handling and Storage Equipment
|
1
|
|
|
N* |
Boise, ID |
| |
Hopper
|
|
141077 |
Hyster E30FR Forklift |
in Forklifts and Accessories
|
1
|
|
|
F* |
MANATI, PR |
| |
Hyster E30FR Forklift
This unit is in San Juan P.R.
Hyster E30FR Forklift, Serial Number: Z943w02001t, Weight (note estimated/actual): 8,930 |
|
150330 |
Hyster |
N50XMA3 |
in Forklifts and Accessories
|
1
|
|
0.00
|
|
Fayetteville, NC |
| |
HYSTER N50XMA3 FORKLIFT
POSTED DATE: 5/15/13
HYSTER N50XMA3 FORKLIFT: NARROW AISLE STRADDLE, 24 VOLT, CURTIS SEPEX CONTROLLER, UL CLASS E, HOOK 2/STG CRG 33.75``, MAST 2 STAGE 150`` VISTA LFL, 95`` L/H, 6.3`` F/L, NO LBR, OPERATOR LEXAN SHIELD GUARD-MAST, TIRE-DRIVE 12X5.5 NON-MARK CUSHION SINGLE DRIVE, (1) GNB BATTERY, (1) CHARGER |
|
154997 |
Hyster |
W40Z |
in Pallet Jacks
|
1
|
|
0.00
|
|
Circleville, OH |
| |
HYSTER W40Z PALLET JACK
POSTED DATE: 4/3/13, NEEDS BATTERY
HYSTER W40Z FORKLIFT: 24 VOLT, SEM TRACTION CONTROLLER, UL CLASS E, 48`` FORKS, LFL, 5`` LIFT HGT, 3.25X4.5`` LOAD TIRES, 9 X 4`` DRIVE, BUTTERFLY-TYPE ACCELERATOR CONTROL, CREEP SPEED TURTLE BUTTON, BATTERY POWER PACK: GNB CHAMPION PALLETPRO, WRAP AROUND TOE GUARD |
|
91567 |
Hytrol |
190 ACC X 5 FT |
in Roller Conveyors
|
1
|
|
600.00
|
F* |
St. Louis, MO |
| |
Hytrol 45 degree Live Roller Conveyor, 19" wide rollers
(22" OAW) x 5' long |
|
113215 |
Portec |
25CS107 |
in Conveyors
|
1
|
|
3,000.00
|
R* |
St. Louis, MO |
| |
Inclined Portec Belt Conveyor, 21" wide belt x 111" long
Model 25CS107 "Flomaster" - Serial #179672-318941
With Reliance 1/2 HP Motor, 1725 RPM. |
|
116012 |
Intralox |
|
in Conveyors
|
1
|
|
4,000.00
|
R* |
St. Louis, MO |
| |
Intralox Crossover Belt Conveyor
Belt Speed: 48 FPM - RL 16.20 - 12" wide plastic interlocking belt (16" OAW) x 9' OAL - 32" high (to top of belt).
With side guides and 1/2 HP motor, 230/460 volt. |
|
91906 |
JanTec Inc |
PTM EHD 8654-90 |
in Conveyors
|
1
|
|
600.00
|
F* |
St. Louis, MO |
| |
JanTec 90 Degree Powered Belt Turn Conveyor for Pallets
54" wide belt, 30" elevation to top of belt, 86" outside radius of belt, 45 FPM belt speed.
Wtih 5 HP drive, 230/460 volt and Tigear Right Angle Reducer. |
|
116222 |
Kamflex |
704 |
in Conveyors
|
1
|
|
3,700.00
|
|
St. Louis, MO |
| |
Kam-Flex Belt Conveyor
24" Wide coated fabric belting (44" OAW), stainless steel frame, 26" elevation to top of belt, 10-6" overall length (146" with skid)
Model 704, Serial Number 20081094 - Speed: 63 FPM |
|
118779 |
Kamflex |
704 |
in Conveyors
|
1
|
|
3,700.00
|
F* |
St. Louis, MO |
| |
Kam-Flex Belt Conveyor
24" wide coated fabric belting, stainless steel frame, 26" elevation to top of belt, 10'-6" overall length.
Model 704, Serial #20081093 - Speed 63 FPM |
|
143381 |
KUKA |
180-2 PA |
in Materials Handling and Storage Equipment
|
1
|
|
|
|
Fort Wayne, IN |
| |
KR 180-2 PA articulating robot
6 Axis, floor mounted, robotic articulating arm palletizer. Has a 180kg payload capability including end arm tooling. More OEM information here: http://www.kuka-robotics.com/en/products/industrial_robots/high/kr180_r2500_extra/start.htm |
|
142739 |
Live Bottom Surge Bin |
in Materials Handling and Storage Equipment
|
1
|
|
20,000.00
|
|
St. Louis, MO |
| |
Live Bottom Surge Bin
Live Bottom design with 3' Tall bin walls, tapered 38" at top and 44" at bottom.
Bin has 4' top cover on discharge end. Urethane type main belt with positive drive design. Bin has end discharge housing which is designed to allow direct bolting of a discharge screw conveyor trough (See Item #142736 - not included in this price.) With (2) 10" dia 304 stainless steel unloading rotary picker reel shaft assemblies which consist of a picker shaft, support bearings & drive package. 12 gauge type 304-2B Stainless Steel. Includes sub-frame of 4" square tube legs. |
|
156396 |
Marchant Schmidt |
|
in Conveyors
|
1
|
|
|
N* |
Dunkirk, NY |
| |
Mobile Conveyor - 15'-10" long (including retract)
Designed to distribute product over 6' cooler bed. |
|
151291 |
Nova |
351FP |
in Materials Handling and Storage Equipment
|
23
|
|
|
|
Fairburn, GA |
| |
Nova Truck / Dock Locks
Air operated.
Inside Light, outside truck control light and ram activation handle. Mechanical truck restraint and housing - ram rises in front of truck's ICC bar to restrain forward truck movement. See Extended Description for diagram. |
|
122898 |
Palamatic Model 160 Vacuum Lifter with JIB |
in Lifters and Hoists
|
2
|
|
|
|
Memphis, TN |
| |
Palamatic Model 160 Vacuum Lifter with JIB
Palamatic Model 160 Vacuum Lifter with JIB, age 12 years, load capacity 55lbs. |
|
150857 |
Columbia |
LTS-006/PD/OC |
in Materials Handling and Storage Equipment
|
1
|
|
|
F* |
Lee, FL |
| |
Pallet Shunter
Load Transfer station W/auto pallet dispensing & auto out feed cart. Model Number: SPL/LTS/460V/006 |
|
147848 |
SPX |
A |
in Lifters and Hoists
|
1
|
|
1,500.00
|
|
St. Louis, MO |
| |
Portable Crane - Heavy Duty
3300 lbs of Boom Extended Capacity - 4400 lbs of Boom Retracted Capacity
Model A - with SPX Power Team P59L |
|
115356 |
Portec |
B-3424-45 Deg |
in Conveyors
|
1
|
|
600.00
|
R* |
St. Louis, MO |
| |
Portec 45 degree belt turn
Model B-3424-45 Deg - S/N 157243-303232
Belt width 25-1/2" (OAW 29" - with drive 35" wide) - 48" long (54" with skid) - 40" high (48" with skid) |
|
113214 |
Portec |
25CS54 |
in Conveyors
|
1
|
|
3,000.00
|
R* |
St. Louis, MO |
| |
Portec Belt Conveyor, 21" wide belt x 55" long
Model Flo Master 25CS54 - Serial #179672-318943
With 1/2 HP Motor, 1725 RPM - OAW = 36" - Roller width = 23" - OAH = 40"(on legs) |
|
94457 |
Premier |
|
in Conveyors
|
1
|
|
|
|
Elkton, MD |
| |
Premier Pnuematic Vacuum System -
Premier Pnuematic Vacuum System -(1)PremierModular in-line Cartridge filter, aluminum, part# 5215-12,(1)Premier Filter receiver, carbon steel with epoxy lining, model F/R 8-18, single door access, (1) LH cyclone, 14ga ss304 size 2, 13 in diameter x 39in high, still installed - this system identical to item #92153 only difference is smaller filter receiver, no blower |
|
92153 |
Premier |
|
in Conveyors
|
1
|
|
|
F* |
Elkton, MD |
| |
Premier Pnuematic Vacuum System -250 cfm
Premier Pnuematic Vacuum System (1)PremierModular in-line Cartridge filter, aluminum, part# 5215-12,(1)Premier Filter receiver, carbon steel with epoxy lining, size 45in diameter x 96" high, single doors access, (1) cyclone, 14ga ss304 size 2, 13 in diameter x 39in high, still installed, nearly same system as item #94457, except for larger filter receiver |
|
141709 |
RICO R-PT PALLET JACK |
in Pallet Jacks
|
1
|
|
0.00
|
F* |
Old Hickory, TN |
| |
RICO R-PT PALLET JACK
POSTED DATE:4/12/12 No forks on unit has locking hitch for use as tugger hr meter replaced at 383 has 188hrs.
RICO R-PT PALLET JACK: 6000 LB, 24 VOLT, MANUAL TILLER STEERING, DRIVE WHEELS: 10 X 5`` RUBBER, LOAD WHEELS: 6 X 4`` POLY, HORN, DEADMAN BREAKING, TOE GUARD, (1) EXIDE 12-E100-15 BATTERY |
|
141710 |
RICO R-PT PALLET JACK |
in Pallet Jacks
|
1
|
|
0.00
|
|
Old Hickory, TN |
| |
RICO R-PT PALLET JACK
POST DATE:4/12/12 This unit does not have forks has locking hitch used as tugger
RICO R-PT PALLET JACK: 6000 LB, 24 VOLT, MANUAL TILLER STEERING, DRIVE WHEELS: 10 X 5`` RUBBER, LOAD WHEELS: 6 X 4`` POLY, HORN, DEADMAN BREAKING, TOE GUARD, (1) EXIDE 12-E100-15 BATTERY |
|
94574 |
Roach |
|
in Conveyors
|
1
|
|
2,000.00
|
F*R* |
St. Louis, MO |
| |
Roach Belt Conveyor with Hydraulic Lift
Autoquip Series 35 Hydraulic Lift, Model 48S25EXN, Serial #1106273742.
Max load 2,500 lbs - axle load 900 lbs. - 16" x 96" table, 36" lift. Lowered height 8.5", raised 43". With 1.5 HP motor, 230/460 volt. Conveyor OAW = 20" - belt is 12" wide x 165" long |
|
150260 |
SafTcart lift cage |
in Materials Handling and Storage Equipment
|
1
|
|
|
|
Moncks Corner, SC |
| |
SafTcart lift cage
Capacity: 4500 lbs
Model STS-20, Serial# 200121, date: 7/08 |
|
157109 |
Scale Hoppers |
in Materials Handling and Storage Equipment
|
2
|
|
|
N* |
Boise, ID |
| |
Scale Hoppers
|
|
155995 |
Advanced Lifts |
MEC B2001336 |
in Lifters and Hoists
|
2
|
|
8,500.00
|
|
Crete, NE |
| |
Scissor Lift - Lifting Capacity 6,500 #
Powered Lift Units for Full Pal/Depal Pallet Conveyors
Advanced Lifts - Model # PVW-6036 - very wide - Powered to up position, gravity to lower - 36" of travel - Width 60" - Length 60" - Lowered Height 6.5" - Raised height 42.5" - 460/60/3 - Speeed up 23 seconds - (4) Proximity Sensors, (4) PE Controls, (2) Motor Starters |
|
112896 |
Screw Conveyor - 6" dia. x 19'-2" long (NPSC shop made) |
in Conveyors
|
1
|
|
12,000.00
|
|
Jefferson, WI |
| |
Screw Conveyor - 6" dia. x 19'-2" long (NPSC shop made)
304 Stainless steel construction ** NEW - NEVER USED **With 3 HP shaft-mounted drive. Complete with CIP spray bar assembly and stainless steel cover. |
|
124681 |
Thomas Conveyor Co. |
|
in Conveyors
|
1
|
|
6,000.00
|
|
St. Louis, MO |
| |
Screw Conveyor - 6" diameter x 18' long x 19 degree incline
** NEW - NEVER USED ** - 304 Stainless steel - with cover and slide gate.
Flush end discharge (7" square) and 7" square inlet opening - with 1 HP motor, 1755 RPM and Smuggler gearbox. To handle 114 CFH of extruded pet food at 19 PCF when control fed (50% trough loaded) with 1 HP motor operating @ 58 RPM. With full pitch helicoid screw mounted on 2" schedule 40 pipe, continuously welded on both sides - double flighting after hanger. |
|
142736 |
Screw Conveyor - Stainless Steel |
in Conveyors
|
1
|
|
10,000.00
|
|
St. Louis, MO |
| |
Screw Conveyor - Stainless Steel
9" Dia. x 8'-4" long reversing screw feeder
Used to convey 1000 lbs/hr of pet food at a rate of 25 lbs./cu ft. based on 100% loading. 9SS312 Screw Auger with variable pitched flights continuously welded to pipe, 1-1/2" SS shafts - 10 GA. SS U-trough. With 1 HP Hi-Efficiency Severe Duty Motor, 1740 RPM & 20 RPM Reducer. Hinged & gasketed drop-bottom clean out door. |
|
124268 |
Single Track Conveyor off small bag line |
in Conveyors
|
1
|
|
|
|
Mississauga, ON |
| |
Single Track Conveyor off small bag line
Single 7-1/2" LBP |
|
152629 |
Ryson |
1500-400-C1 |
in Conveyors
|
1
|
|
|
|
Breinigsville, PA |
| |
Spiral Conveyor
Intended to be used to elevate cases of finished product. Asset was never installed. Crated and ready for shipment. Drawing available upon request. Located in Virginia. |
|
157110 |
Spiroflow |
FSC318C |
in Materials Handling and Storage Equipment
|
1
|
|
|
N* |
Coppell, TX |
| |
Spiroflow Feed Hopper
|
|
155555 |
Stainless Steel Screw Conveyor - available July, 2013 |
in Conveyors
|
1
|
|
|
F* |
St. Joseph, MO |
| |
Stainless Steel Screw Conveyor - available July, 2013
9" dia screw x 27' long
With hopper, airlock & 5 HP motor - Capacity 800 lbs/min. Horizon Systems Airlock, Model #HS1414-C.1. Stainless Steel Hopper, Model 4 x 2, 2,150 lb. capacity. |
|
147993 |
Thomas Conveyor Co. |
|
in Conveyors
|
1
|
|
10,000.00
|
F* |
St. Louis, MO |
| |
Thomas Screw Conveyor - 14" dia x 14'-4" long
Helicoid Screw Conveyor - mild steel construction.
To handle 39,250 lbs/hr (1570 cfh) of pet food dryer fines at 25 lbs/cu. ft., 64 RPM screw speed - with 5 HP SEW Eurodrive |
|
157191 |
Toyota |
8FGU18 |
in Forklifts and Accessories
|
1
|
|
0.00
|
N* |
ORANGE, TX |
| |
TOYOTA 8FGU18 FORKLIFT
POSTED DATE: 5/21/13, Tires have 10-20% wear.
TOYOTA 8FGU18 FORKLIFT: 3500 LBS, LP GAS, 2 STAGE MAST: 119``, L/H 78.5``, F/L 30.5``, O/H GUARD 81.90``, 48`` LBR, 4 FUNCTION VALVE, TOYOTA 2.2L 4Y-ECS ENGINE, NO FORKS, TIRES SOLID PNEU: FRT 6.50-10-10PR, REAR 5.00-8-8PR, LIGHTS, RATED LPS, CASCADE 35D-FDD-03A DUMPER |
|
117614 |
Carbis Inc. |
3-1B-FYLH-126 and 3-1B-FYRH-126 |
in Materials Handling and Storage Equipment
|
16
|
|
|
|
Pass Christian, MS |
| |
UNUSED -Railcar Articulating Unloading Arms-
(8) Left Hand - Carbis Model 3-1B-FYLH-126
(8) Right Hand - Carbis Model 3-1B-FYRH-126 |
|
157290 |
Used Auto Crane (Torrance, CA) IRG-13-102 Bid Due 5-23-13 |
in Cranes
|
1
|
|
|
N* |
Houston, TX |
| |
Used Auto Crane (Torrance, CA) IRG-13-102 Bid Due 5-23-13
Please contact Anthony Figueroa at anthony.r.figueroa@exxonmobil.com or 713-478-8266.
Bid Due Thursday, May 23, 2013 at 2 PM Central Standard Time - Model 3203
- 3200 lb Lift
- 15’ Reach
*NOTE - This picture is of a new Auto Crane and is for reference purposes only.
Terms
1. Material will be paid at 100% within 3 business days of being issued the Award Letter.
2. Material will be loaded for the buyer.
3. Equipment is SOLD as is WHERE is.
4. Buyer will be responsible for trucking.
5. Buyer will be responsible for any demurrage fees.
Rules before Bidding
You DO NOT have to register to bid on this material.
1. Just print the bidders page found below and fax it to 281-944-4246. -OR- you can click above on the button for "Counter offer for this item."
2. Email bids are accepted. You can send an e-mail and Reference the Acct# IRG-13-103 to devin.v.lamb@exxonmobil.com
3. MMR recommends you view the equipment before bidding. |
|
157255 |
Supply Pro |
|
in Materials Handling and Storage Equipment
|
1
|
|
|
N* |
BUFFALO, NY |
| |
Used Supply Pro Locker Cabinet
|
|
157342 |
K-Tron |
Custom |
in Conveyors
|
1
|
|
|
N* |
Jonesboro, AR |
| |
Vacuum Conveyor
Used to convey rice from totes and dispense via vibratory outfeed conveyor. Mounted on casters. CAUTION: Unit is top heavy. |
|
136881 |
WOLVERINE |
|
in Conveyors
|
1
|
|
9,000.00
|
|
St. Louis, MO |
| |
Wolverine / Proctor & Schwartz Oscillating Spreader
Hydraulically Operated
With T304 stainless steel arm assembly, mild steel base. Base is 65" high - Arm is 19" wide belt x 127" long (overall height = 90") |
|
110825 |
Yale 1000 lb Hoist |
in Lifters and Hoists
|
1
|
|
|
|
Richmond, VA |
| |
Yale 1000 lb Hoist
Yale 1000 lb Hoist; model: 201332AC871
Yale 1000 lb Hoist; model: 201332AC871 |
ALL CATEGORIES 
View 
when document attached
Group Offers into sub-categories 
Materials Handling Equipment - Other