Displaying 1-100 of 153 Page  1 2  |
| Item ID |
Short Description |
Product Type / Details |
#
|
Price |
Note |
Location |
| Make |
Model |
| |
|
$ |
|
 |
148407 |
Pope |
|
in Tanks
|
2
|
|
|
 |
FORT MADISON, IA |
| |
100 Gal Emulsion Tank w/ Agitator
Emulsion Tank with Jacket:
100 Gal.
625 lbs.
SA240-34 s.s.
Agitator:
Pope 900 Series 3hp
146 lbs
All equipment have drawings. |
|
148406 |
Pope |
|
in Food Processing and Handling Equipment
|
1
|
|
|
|
FORT MADISON, IA |
| |
100 Gal Reactor w/ Agitator
Reactor with Jacket:
100 Gal.
412 lbs.
SA240-34 s.s.
Agitator:
Pope 900 Series 3hp
146 lbs
All equipment have drawings. |
|
134803 |
Snyder |
|
in Tanks
|
1
|
|
|
|
Martinez, CA |
| |
1200 Gallon Poly Tank
Flat bottom, 60" dia x 109" high, 18" threaded manway on top |
|
132715 |
157 gal, 316L SS vessel |
in Tanks
|
1
|
|
|
|
Belle, WV |
| |
157 gal, 316L SS vessel
Design pressure -4.0 psi and 2.4 psi at 200 deg. F
Size: 30.5" OD x 52" high, flat bottom and top 157 gal. tank, fabricated from 0.25" stainless steel (type SA-240-316L). |
|
121240 |
Custom Fabrication a |
SS Tank |
in Tanks
|
2
|
|
43,000.00
|
F* |
St. Louis Park, MN |
| |
200 gallon tank
Stainless Steel Tank 200 gallon
Heat jacket and agitator included
Platform/Stairs available as well |
|
157053 |
3 Goulds Pumps ( Goldsmith, TX .) Bid Ends 05/29/2013 |
in General Purpose Liquid Pumps
|
1
|
|
|
 N* |
Kingwood, TX |
| |
3 Goulds Pumps ( Goldsmith, TX .) Bid Ends 05/29/2013
1 lot of 3 Goulds Pumps (Goldsmith, TX ) Bid Ends 4pm CST. 05/29/2013
Contact Darrel Youngblood 281-348-0876
Email dyoungblood@cprpipe.com
Qty 3 - Goulds Pumps Model 3756 3X4X8 - Pic 11
1-40hp 1-15hp 1-20hp
Buyers can see items at facility before placing bid!
Site Will Load
Buyers representative must have proper PPE to enter facility, and will be turned away if proper equipment is not present. | Bidders can inspect items before bidding: | | 1. | To inspect items on the plant site, a copy of the listing must be presented to the plant site representative at the time of the visit by the potential buyer. | | 2. | Only those item(s) listed in the offering will be shown. | | 3. | If during the plant site visit, the potential buyer indicates an interest in any other item(s), the plant site representative hosting the potential buyer should note the interest. He/she should then advise the potential buyer that they will request that a CPR representative contact them regarding such interest. |
|
|
136900 |
400 gallon titanium reactor |
in Food Processing and Handling Equipment
|
1
|
|
|
|
Valdosta, GA |
| |
400 gallon titanium reactor
Alloy Fab, Inc - Ser.# 2589, National Board #1424, built 1983 (photos available upon request)
Shell: 600 psi at 600 deg.F
Jacket: FV/90 psi at 400 deg.F
Shell thk: .75
Head thk: .75
Jacket thk: .25 |
|
147321 |
50,000 gallon, stainless steel lined, atmospheric tank |
in Tanks
|
1
|
|
|
F* |
WASHINGTON, WV |
| |
50,000 gallon, stainless steel lined, atmospheric tank
19 ft. diameter x 24 ft. high
Date: 1973, Manufacturer: Pittsburgh-Des Moines Steel Co., Design temp: 150 deg.F, Material: A-283-70T-Gr'C'. |
|
125515 |
580 gal, CS/SS reactor |
in Food Processing and Handling Equipment
|
1
|
|
|
|
Washington, WV |
| |
580 gal, CS/SS reactor
L-2 Tefzel Reactor, year 1979
Design data: pressure 370 psig shell/ 150 psig tube; temp: -40 /225F shell / -40 /212F tube; Diameter 40" I.D. shell side/ 48" O.D. tube side; height 10'- 11 1/2 overall |
|
157049 |
6 Gaso PD Pumps ( Goldsmith, TX) Bid Closes 05/29/2013 |
in General Purpose Liquid Pumps
|
1
|
|
|
N* |
Kingwood, TX |
| |
6 Gaso PD Pumps ( Goldsmith, TX) Bid Closes 05/29/2013
1 Lot of 6 Used Gaso Pumps (Goldsmith, TX) Bid Closes 4pm CST 05/29/2013
Contact Darrel Youngblood Ph: 281-348-0876
Email dyoungblood@cprpipe.com
Qty 1-Gaso 1849 SN 18284 w/25 hp motor- Pic 5
Qty 1-Gaso 1849 SN 18305 w/7.5 hp motor- Pic 6
Qty 1-Gaso 1849 SN 17765 w/7.5 hp motor- Pic 7
Qty 1-Gaso 1849 SN 16267 w/30 hp motor- Pic 8
Qty 1-Gaso 1849 SN 18148 w/motor - Pic 9
Qty 1-Gaso 1755 SN 18069 w/100 hp- Pic 10
"Sold Is As Is Where Is" Site will load.
Bidders Can See Material before submitting a bid.
Buyers representative must have proper PPE to enter facility, and will be turned away if proper equipment is not present
| Bidders can inspect items before bidding: | | 1. | To inspect items on the plant site, a copy of the listing must be presented to the plant site representative at the time of the visit by the potential buyer. | | 2. | Only those item(s) listed in the offering will be shown. | | 3. | If during the plant site visit, the potential buyer indicates an interest in any other item(s), the plant site representative hosting the potential buyer should note the interest. He/she should then advise the potential buyer that they will request that a CPR representative contact them regarding such interest. |
|
|
133913 |
SFI |
|
in Tanks
|
1
|
|
20,000.00
|
|
Mechanicsburg, PA |
| |
600 Gallon Stainless Steel Slurry Mix Tank
Double walled, insulated and electrically heat traced. Used as a slurry work tank.
Design Pressure: 0.185 psi - Design Temp: 180 deg. F. With agitator, inspection hatch, level probes and load cells that mount to the base of tank legs (which add 12" to the height of the tank). Includes free-standing stainless steel ladder and platform for accessing inspection hatch. Agitator Motor is US Motor, 3 HP, 1745 RPM, 230/460 volt, 3 phase with Boston Gear Reducer, 5 HP, output 2322 lb/in, Ratio 15. *See extended description for drawing. |
|
121390 |
Custom Fabrication a |
90 gal tank and skid |
in Tanks
|
1
|
|
12,000.00
|
|
St. Louis Park, MN |
| |
90 Gallon Tank
Fish Oil Skid w/ platform and 90 gal tank. More pictures and CAD drawing available upon request. |
|
118690 |
9200 gal 304 SS vessel, 500 psi |
in Tanks
|
1
|
|
|
F* |
Fayetteville, NC |
| |
9200 gal 304 SS vessel, 500 psi
"used" 9200 gal 304 SS vessel, 500 psi, 10 ft. outside dia.
9200 gallon, 304 stainless steel vessel on legs, U stamped, 500 psi / FV design pressure @250F, no jacket, Nat'l Board #2014, 10'-0" diameter, 58,000 lbs. the corrosion resistance. |
|
118692 |
Air Receiver Tank. National Board #1483 |
in Tanks
|
1
|
|
|
|
Fayetteville, NC |
| |
Air Receiver Tank. National Board #1483
Capacity: 1256 gal, Size: 120" x 54" OD,
National Board #1483, MAWP 150psi @ 100F, MDMT -20F @ 150psi, Serial no. A4747, Built 1999 |
|
148887 |
Alfa Laval |
M10 |
in Heat Exchangers
|
1
|
|
|
F* |
MEMPHIS, TN |
| |
Alfa-Laval year 2002
-Model M10
-Serial number 30105-65913
- 300Sqft
- 150psi@230f |
|
149706 |
Almatec Diaphragm Pump Model A40ETY |
in General Purpose Liquid Pumps
|
6
|
|
|
|
Hayward, CA |
| |
Almatec Diaphragm Pump Model A40ETY
Diaphragm pump model A40ETY
6 pumps sold individually
serial numbers: 5422-09-04, 5421-09-04, 5877-03-06, 5419-09-04, 5423-09-04, 5420-09-04 |
|
132717 |
Ametek shell and tube heat exchanger; 10" dia x 8'9" length |
in Heat Exchangers
|
1
|
|
|
|
Belle, WV |
| |
Ametek shell and tube heat exchanger; 10" dia x 8'9" length
525 tubes of FEP 160 resin. Tube 0.200" ID by 0.250" OD.
Shell design: 65 PSI at 100 deg.F .
Tube design: 120 PSI at 100 deg.F .
Effective Heat Transfer area 192 Sq.Ft. |
|
93021 |
Anderson |
456 |
in Food Fillers
|
1
|
|
18,500.00
|
F* |
London, ON |
| |
Anderson, Ice Cream Filler
2 L Convocan Filler
Anderson, Model 456, Mfg yr 1992, Up to 65 cups/min
2L round Convocam type paper can
Upgraded to Servo Drive in 2004, 220VAC, 3 ph, 60Hz |
|
142315 |
Moline |
n/a |
in Food Processing and Handling Equipment
|
1
|
|
25,000.00
|
|
Mt Sterling, KY |
| |
Applicator
Intended to be used as an applicator for cornmeal. |
|
123143 |
Automatik ATG300 pelletizer |
in Extruders
|
1
|
|
|
|
Washington, WV |
| |
Automatik ATG300 pelletizer
Automatik ATG300 pelletizer
Automatik ATG300 pelletizer with AC motor, automatic stringup, a 3 foot sluice extension (total of 6 ft) for additional water cooling, vacuum water stripper, and cutter. A spare housing and four spare rotors are also available. |
|
142313 |
Flexicon Corp |
BD-F36W-X |
in Food Processing and Handling Equipment
|
1
|
|
45,000.00
|
|
Mt Sterling, KY |
| |
Bag Dump Station w/intergral Dust Collection System
Flexicon Bag Dump Station w/intergral Dust Collection System in New (Never Used) condition. |
|
157288 |
Loma Systems |
IQ2 |
in Food Processing and Handling Equipment
|
4
|
|
|
N* |
Jonesboro, AR |
| |
Belt Metal Detectors
Measurements and more information to come. |
|
155550 |
Bran+Luebbe |
VE-C45 |
in General Purpose Liquid Pumps
|
1
|
|
|
|
St. Joseph, MO |
| |
Bran & Luebbe Marinade Pump System - available August, 2013
Type VE-C45 - S/N 9113494
6-Head metering system (only used 5 heads). With feed pump, APF marinade pump |
|
155598 |
Breddo Likwifier |
LOR-100 |
in Tanks
|
1
|
|
18,000.00
|
|
St. Joseph, MO |
| |
Breddo Liqwifier - 100 gallon capacity - available August, 2013
Model LOR-100
Tank is 3'-6" dia. x 2'-6" high (OAH = 5'-1")(Gravy Mixing Tank). Skid is 5'-6" long - with 30 HP motor. ** See Extended Description for additional specs ** |
|
838 |
BTU Engineering |
TRS142464GT |
in Baking Equipment
|
1
|
|
19,500.00
|
F* |
Scotia, NY |
| |
BTU INTERNATIONAL REFLOW OVEN 275ºC
Reflow Oven
Manufactured 1995--Qualified and Never Used
BTU International Model TRS-142-4 64 GT |
|
153072 |
Burkert |
|
in Valves
|
4
|
|
|
|
St. Joseph, MO |
| |
Burkert Control Valves
|
|
155606 |
Central States Indus |
TL6-BFG |
in Tanks
|
1
|
|
30,000.00
|
F* |
St. Joseph, MO |
| |
Central States Industrial Cooling Water Skid
Self-controlled, 100 gallon tank with Gould Pump.
Gould Pump: size 1 X 2-8 with 7.5 HP motor. Alfa Laval: MAWP 150 psi @ 302 degree F, EMMT: 20 degree F @ 150 PSI, S/N 3011199261, Model TL6-BFG, air 134.5 sq. ft., A-D im = 118mm w/f1 0.05mm plts; Burkett control valve, Tru-Flo butterly valve, pressure relief valve, temperature sensors & gauges. |
|
98575 |
Chempump |
W2C1-5K |
in General Purpose Liquid Pumps
|
5
|
|
|
F* |
La Porte, TX |
| |
Chempump model W2C1-5K, size 1 x .75
Chempump model W2C1-5K, size 1 x .75, 4 gpm, 316 SS, case and Impellar are 316 ss, size 1x 0.75, 5.9 kw motor, 3450 rpm, 460 volts, LCEC# D84391, |
|
155563 |
CIP System - (2) Tanks - available August, 2013 |
in Tanks
|
1
|
|
7,500.00
|
|
St. Joseph, MO |
| |
CIP System - (2) Tanks - available August, 2013
Miller Aldrige tanks - 500 gallons each.
On frame with AMPCo pump, 3500 RPM, Model 4X3PCH2 - S/N CC-2761-1-1 |
|
138988 |
Columbian Tec Tank |
|
in Materials Handling and Storage Equipment
|
1
|
|
18,000.00
|
|
Bloomfield, MO |
| |
Columbian Mass Flo Tec Tank Bin / Bin Vent
10'-2" dia x 47'-4" tall - Capacity 2860
With Kistler-Morse load cells with scale read-out. S.O. #04-0044 |
|
157289 |
Tromp |
|
in Baking Equipment
|
1
|
|
|
N* |
Jonesboro, AR |
| |
Complete Dough Sheeting Line
Orginally intended for dough sheeting of pasty/meat pie type products. More information to come. |
|
157265 |
Loma Systems |
IQ2 |
in Food Processing and Handling Equipment
|
1
|
|
|
N* |
Fort Smith, AR |
| |
Conveyor Metal Detector
Formerly running 16oz. infant cereal boxes. |
|
150724 |
Groen |
1000 GAP SP |
in Tanks
|
1
|
|
|
|
Chatsworth, CA |
| |
Cooking Oil Storage Tank
1,000 gallon capacity. Used to store fryer oil for deep frying/cooking. |
|
157286 |
Sanimatic |
|
in Tanks
|
5
|
|
10,000.00
|
N* |
Jonesboro, AR |
| |
COP Tanks
Various sizes. More information to come. |
|
143568 |
Weyerhaeuser Spacekr |
|
in Materials Handling and Storage Equipment
|
1
|
|
4,500.00
|
F* |
Hager City, WI |
| |
Corrugated Liquid Bulk Totes - 110 Gallon Capacity
Size: 37.75" x 37.75" x 19.75" (ID).Complies with USFDA and Kosher requirements for food contact - Max fill temp: 170 degrees F -Quantity: (95) Cassettes; (97) Bladders; (107) Caps.
Style: Die Cut Container - Material: 8 plies - Liners: 69 lb Mediums: 33 lb A Flute Inner ply: 180 lb (90/90 laminate) - 2 Bottom enclosures per container - Internal load limit = 1850 lbs. - Strapping: 0.625" Polyester, 0.030" thickness, 1100 lb tensile - (4) straps, (2) each way. Bladder: Polyethylene Bulk Liquid Bag - Size: 58" x 58" ID, seal to seal - Material: 3 ply construction (inside-outside): 4 mils Octene LLDPE/4 mils Octene LLDPE/4.6 mil Octene LLDPE. Cassette is 37.5" - Material: 350 lb B/C double wall - Caps (1) per unit -64.5" x 51.875" See Extended Description for spec sheet. |
|
98574 |
Croll-Reynolds |
|
in Heat Exchangers
|
1
|
|
|
|
La Porte, TX |
| |
Croll reynolds, Hastelloy C Heat Exchanger
MFG by Croll-Reynolds in 1993; 2" suction; 2" discharge; 2x2 ejector y & z stages; steam chest 150 psi @450 deg F; body 15FV @ 450 deg F, LCEC#D88630 |
|
139663 |
DEL |
SASRC-TS |
in Canning Equipment
|
1
|
|
500,000.00
|
|
St. Louis, MO |
| |
DEL Overcapper
SASRC-TS (Sanitary Adjustable Spinning Rod Capper) currently set up for 209.5" cap diameter on 1.465" container height. Max speed: up to 300cpm.
Side bend telescoping chute, SASRC digital dia & height adjustment, BLE-23 bulk loading elevator, RF-4700 Rotary Feeder, Overcap Air Conveyor On-Edge, Overcap Container Conveyor, 4-1/2" table top, NCOC No Cap Detector, cluster lube system. Conveyor height from floor to top of conveyor = 36", compressed air requirement: 10 cfm @ 80 psi. System includes Carelton Technologies Upender for 209.5/208 x 107.5 can (1-7/16" high). |
|
148888 |
Delaval High Pressure Pump |
in General Purpose Liquid Pumps
|
1
|
|
|
|
MEMPHIS, TN |
| |
Delaval High Pressure Pump
Delaval High Pressure Pump
Serial number 6704857 |
|
121241 |
Delta T Systems |
SF5000 |
in Feeders
|
1
|
|
20,000.00
|
|
Toronto, ON |
| |
Delta Systems Cross Feeder
belt width 52", total length ~ 19', discharge to the left hand side, servo driven |
|
93187 |
Demaco |
MX2000 |
in Blenders
|
1
|
|
22,500.00
|
F* |
Danville, VA |
| |
Demaco, Dough Mixer
Dough Mixer, Model XX-24S, 1988, MX2000, 2000 lbs/hr |
|
93183 |
Demaco |
CR21 |
in Baking Equipment
|
1
|
|
17,500.00
|
F* |
Danville, VA |
| |
Demaco, Sheet Former, Dough
Pasta Dough Sheetformer, 1988. Model CR-21 |
|
93184 |
Demaco |
CR21 |
in Baking Equipment
|
1
|
|
17,500.00
|
|
Danville, VA |
| |
Demaco, Sheet Former, Dough
Pasta Dough Sheetformer, 1988. Model CR-21 |
|
93185 |
Demaco |
CR21 |
in Baking Equipment
|
1
|
|
17,500.00
|
F* |
Danville, VA |
| |
Demaco, Sheet Former, Dough
Pasta Dough Sheetformer, 1988. Model CR-21 |
|
97618 |
Despatch |
VDAF CONVEYOR |
in Baking Equipment
|
1
|
|
9,500.00
|
F* |
Scotia, NY |
| |
DESPATCH CONTINUOUS BELT OVEN 204ºC
Belt Oven
Despatch Model VDAF |
|
112895 |
Diverter Valve (NPSC Shop Made) |
in Valves
|
1
|
|
1,500.00
|
|
Jefferson, WI |
| |
Diverter Valve (NPSC Shop Made)
Inlet 26.5" x 3.75" - Diverter discharges 26.5" x 4.00"
304 Stainless steel construction. Includes SMC pneumatic cylinder. ** NEW - NEVER USED ** |
|
153966 |
Retec |
|
in Dryers
|
10
|
|
|
|
Fremont, MI |
| |
Double Drum Dryer
Drums are 42" wide each and 120" long. Drums are hydraulic powered and were custom built for this application but could be resued in other similar processes. more information available upon request. |
|
156020 |
LYCO Manufacturing |
|
in Screens
|
1
|
|
|
F* |
Ft Dodge, IA |
| |
Double Drum Screen
24" x 48"
Serial #DDS-0605-41132 - Inner drum wire spacing of .080" or 3/32" of an inch. With 2 HP Nord Gearmotor, 41 RPM. ** SEE EXTENDED DESCRIPTION FOR SPECS ** |
|
150686 |
Vemag |
Robot HP15CK |
in Blenders
|
1
|
|
110,000.00
|
|
Chatsworth, CA |
| |
Dough Pump
|
|
157285 |
Quantum Topping Syst |
QTGA1000 |
in Feeders
|
3
|
|
|
N* |
Jonesboro, AR |
| |
Dry Ingredient Applicator
Used for applying dry ingredients, hard cheeses, granules, spices, seeds, salt, or other similar ingredients. Cantalivered design for easy install or removal. Mounted on castors. Stainless steel washdown capable. www.q-t-s.com |
|
88150 |
Durco |
Mark II |
in Water Pumps
|
1
|
|
|
F* |
La Porte, TX |
| |
Durco Centrifical Pump Mark II Size 2x 1.5x10
Durco Centrifical Pump
LCEC# D83112
Durco Centrifical Pump Mark II Size 2x 1.5x10, 100 gpm, 240 ft head, 3500 rpm pump case, carbon steel construction, 25 hp motor 3535 rpm, 460 volts, LCEC# D83112 |
|
118781 |
Elmar |
|
in Canning Equipment
|
1
|
|
65,000.00
|
|
St. Louis, MO |
| |
Elmar 54 Pocket Can Filler
Currently set up for: 5.5 oz (156 grams), 307 dia x 109.3 high, aluminum 2 piece can. Used with Angelus 101L seamer, but seamer is not available.
Speed: Up to 1200 cpm (easily sustainable at 1100 cpm) - Accuracy: Better than + or - 5 grams. Filler system includes: Stainless steel base for an Angelus 101L seamer (seamer NOT included), NCNF Hyde park system, NEW fill bodies (using used pistons), NEW valve bodies & plugs. ** SEE EXTENDED DESCRIPTION FOR DRAWING ** |
|
93133 |
Eriez |
HS 36 |
in Feeders
|
1
|
|
3,000.00
|
F* |
London, ON |
| |
Eriez, Vibratory Feed Hopper
Eriez Vibratory FeederUsed to feed Chips, Nuts and other Small Items, Model HS 36 |
|
150688 |
Christy Machine |
Flour Duster |
in Feeders
|
3
|
|
|
|
Chatsworth, CA |
| |
Flour Duster
|
|
142400 |
FMC |
101-2004 |
in Canning Equipment
|
4
|
|
|
|
St. Louis Park, MN |
| |
FMC/JBT Automatic Retorts
Also has multiple self-guided vehicles (SGV) that complete the automated process. More information available upon request. |
|
155973 |
Gas dryer mesh belt ovens, model Sprint 2000 HO-72, max. 100,000 BTU |
in Baking Equipment
|
2
|
|
|
|
RICHMOND, VA |
| |
Gas dryer mesh belt ovens, model Sprint 2000 HO-72, max. 100,000 BTU
(2) modular gas dryers with continuous belt conveyor. The two units are welded together.
230 volts, 3 ph, 60 hz, |
|
110831 |
Gate Valve; 3" 600 lb. |
in Valves
|
1
|
|
|
|
Richmond, VA |
| |
Gate Valve; 3" 600 lb.
Gate Valve; 3" 600 lb. by Kitz
Gate Valve; 3" 600 lb. by Kitz.
P1V code: G37S |
|
99486 |
Hankison |
PR2000 |
in Dryers
|
1
|
|
3,500.00
|
F*R* |
St. Louis, MO |
| |
Hankison Air Dryer
Model PR2000
2000 scfm @ 100 psig & 100 degrees F. (3,435 m3/hr @ 7 bar & 38 degrees C. Max working pressure 200 psig, max inlet temp 120 degrees F, 460 volt, 3 phase, 60 HZ. |
|
87536 |
Heat Exchanger; type B-300; 6 inch shell steam U-tube |
in Heat Exchangers
|
1
|
|
|
|
Richmond, VA |
| |
Heat Exchanger; type B-300; 6 inch shell steam U-tube
Tube side 5000 psig; Shell side 400 psig steam; 400 F max |
|
157113 |
Flexicon Corp |
|
in Materials Handling and Storage Equipment
|
1
|
|
|
N* |
Boise, ID |
| |
Hopper
|
|
98296 |
Labour |
A-40 |
in Water Pumps
|
1
|
|
|
|
La Porte, TX |
| |
IDN Mix Pump; A-40; LVA; 4x3-9.5/13
IDN Mix Pump; A-40; LVA; 4x3-9.5/13 |
|
151651 |
Hapman |
600 SS |
in Feeders
|
1
|
|
15,000.00
|
|
Mt Sterling, KY |
| |
Inclined Flour Auger
Flour delivery auger. More information available upon request. |
|
150687 |
Lanly Company |
7504 |
in Ovens
|
1
|
|
|
|
Chatsworth, CA |
| |
Infrared Oven
Continuous Two Zone, Two Pass, Baking Oven. Made specifically for Nestle. Manual is available. Please contact for further pictures and information. |
|
132718 |
Iwaki Walchem, model MDH, centrifugal pump |
in Water Pumps
|
1
|
|
|
|
Belle, WV |
| |
Iwaki Walchem, model MDH, centrifugal pump
magnetic drive, variable speed drive motor
Magnetic drive centrifugal pump manufactured by Iwaki Walchem Corporation. |
|
154243 |
K-Tron |
K2MS100DR |
in Feeders
|
1
|
|
17,000.00
|
|
Fairburn, GA |
| |
K-Tron Loss-in-Weight Screw Feeder
Model K2MS100DR - Serial #1065191
In use for 6 months. Single screw modular volumetric feeding system with: Base feeder system with self-emptying Powersphere feed hopper with horizontal spherical agitator to condition product for optimal flow to feed screw. Selectable feed screw to handle variety of products, 80mm coarse HD spiral would give approx. 150 CFH capacity. 21 PPM equates to 126 CFH at 10 PCF (de-rated from specified 15 PCF). Screw extended for a centerline of inlet to centerline of discharge distance of approx. 22.6" for vertical downspout. Food grade gaskets of FDA approved neoprene. 2 HP 480 VAC 3 phase motor, TEFC. Constructed of type 316 Electropolish finish stainless steel on material contact surfaces. 300 Liter (10 CF) 6D Electropolish finish hopper with standard auto lid, including a 4" dia vent stub and a 10" dia inlet. Previously used for pet food fines; 10 to 30 lbs per cu. ft. - Size: <3/16" - Moisture: 12% - Rate: 3.5 to 21 lbs per minute. |
|
133583 |
K-Tron |
K2MLT35DR |
in Feeders
|
1
|
|
10,000.00
|
|
St. Louis, MO |
| |
K-Tron Loss-in-Weight Stainless Twin Screw Batcher
Model K2MLT35DR - used with powder material. Includes Hapman hopper, load cells, & MAC MD20 Rotary Valve, S/N 81249-001-1 .
Electropolished 300 series stainless steel contact surfaces, 8.5 cu ft asymmetrical hopper w/auto refill lid w/inlet & 6" OD vent with filter sock. Used with powder material, bulk density: 32-38 lbs/cu ft, feed rate: 30-45 CFH, motor is TENV. Fixed speed arch breaker & control - flexible connections for 6" OD inlet and 4.5" OD discharge. NEMA 4 speed control module mounted on machine, KSU operator interface, Modbus/TCP control interface. Unit mounted on mild steel painted frame. See Extended Description for additional specs. |
|
122407 |
K-Tron |
SW600 |
in Feeders
|
1
|
|
12,000.00
|
F* |
Davenport, IA |
| |
K-Tron Weigh Belt Feeder
Model SW600
All Stainless Steel Construction with stainless steel diverter and stainless steel bottom hopper. Missing one side panel. Controller: KSA w/SCM included. Material: Mixed Meal - Bulk Density: 25-35 pcf - Feed Rate: 1000 ppm. Electrical Class TENV (general purpose areas only). Material Temp: 70-90 degrees - Partical Size: 16-20 mesh - Characteristics: Free-Flowing. |
|
118551 |
Karl Schnell |
FD 225 DKV |
in Food Processing and Handling Equipment
|
1
|
|
15,000.00
|
F*R* |
St. Louis, MO |
| |
KARL SCHNELL Vacuum Emulsifier
Stainless Steel Vacuum Emulsifier FD 225 DKV with cutting housing/hole plate dia. 225mm with 6mm and 4mm hole plates, (2) three-winged knife heads w/replaceable inserts, e-cutting set with shear pins.
With 130 HP drive motor, 1750 RPM - 440 volt, 3 phase, 60 HZ. ** SEE EXTENDED DESCRIPTION FOR SPECS & DRAWING ** |
|
106517 |
Kemp Model QB-3 Atmospheric Blower Purge Dryer |
in Dryers
|
1
|
|
|
F* |
NEW JOHNSONVILLE, TN |
| |
Kemp Model QB-3 Atmospheric Blower Purge Dryer
Kemp Model QB-3 Atmospheric Blower Purge Dryer, s/n 1069565; capacity 7200scfm, inlet press. 45psig, inlet temp 100degF, cycle 8 hours, power 460v-3ph-60hz, Nema4, heater 368kw, wired in delta, turbo-blower capacity 720scfm, motor 100hp @3500rpm, age 1996 |
|
155064 |
General Electric |
JPK55BM2BB |
in Baking Equipment
|
2
|
|
950.00
|
|
Little Chute, WI |
| |
Kitchen Ovens
Ovens used in Sensory Lab for Pizza production. |
|
149418 |
Boyd |
BR 6000/900-1256 |
in Baking Equipment
|
1
|
|
|
F* |
Chatsworth, CA |
| |
Koppens Fryer
Some minor electrical work needed to be in good working order. |
|
156394 |
Kinequip |
SIHI LPHR 45317 |
in Pumps
|
3
|
|
|
N* |
Dunkirk, NY |
| |
Liquid Ring Vacuum Pump
SIHI LPHR 45317 with 10 HP TEFC Reliance Electric Motor continuous duty, frame 215T
** SEE EXTENDED DESCRIPTION FOR SPECS ** |
|
142739 |
Live Bottom Surge Bin |
in Materials Handling and Storage Equipment
|
1
|
|
20,000.00
|
|
St. Louis, MO |
| |
Live Bottom Surge Bin
Live Bottom design with 3' Tall bin walls, tapered 38" at top and 44" at bottom.
Bin has 4' top cover on discharge end. Urethane type main belt with positive drive design. Bin has end discharge housing which is designed to allow direct bolting of a discharge screw conveyor trough (See Item #142736 - not included in this price.) With (2) 10" dia 304 stainless steel unloading rotary picker reel shaft assemblies which consist of a picker shaft, support bearings & drive package. 12 gauge type 304-2B Stainless Steel. Includes sub-frame of 4" square tube legs. |
|
128390 |
Lodige |
W180 |
in Blenders
|
1
|
|
|
F* |
Ziln, Zlinsky |
| |
Lodige Model W180 Blender
Lodige Model W180 Blender, High rotation speed agitator, used for preparation of dry blends of PVB,Two tanks agitator with hydraulic controllled cover and release valves. Volume 70litres. Inside cover is water temperable. It is possible to add pulwer and liquid components. age 1970, good condition |
|
157112 |
Loss in Weight Feeder |
in Feeders
|
1
|
|
|
N* |
Boise, ID |
| |
Loss in Weight Feeder
|
|
147606 |
Mac |
MD260 |
in Feeders
|
1
|
|
|
|
Innisfail , AB |
| |
Mac Airlock - MD260
Stainless Steel
Serial # 23535-007-1 - With 3 HP US Motor, 1765 RPM, Frame 182T, 230/460 volt - and Gearbox, ratio 40:1. |
|
134025 |
Mac |
ADIV5 |
in Valves
|
1
|
|
500.00
|
F* |
St. Louis, MO |
| |
Mac Blower Diverter
Max 250 psi Air
5-1/2" inlet - 10" outlet |
|
124675 |
Mac |
MD260 |
in Feeders
|
1
|
|
15,000.00
|
F* |
St. Louis, MO |
| |
MAC Multi-Duty Rotary Airlock, Model MD260
Cast 304 stainless steel housing and end plates.
TS4 seal assembly, outboard sealed bearings, operating temperature service, 200 deg. F., 304 stainless steel rotor construction, 8-vane, open end rotor with fixed relieved 1/8" land rotor tips - with 3 HP motor, 1765 RPM and Eurodrive Reducer, 22 RPM output (41.74:1 ratio). Inlet 19" x 18-1/2" square - outlet 25" x 25" square. |
|
147995 |
Mac |
SEA 300 |
in Feeders
|
1
|
|
25,000.00
|
|
St. Louis, MO |
| |
MAC Rotary Airlock - Model SEA 300
Cast 304 stainless steel housing and end plates.
Side Entry - Teflon packing gland seals, outboard roller bearings, stainless steel rotor - 12-Vane SEA 200 & larger open end rotor - NEMA 4 motion switch, 120 volt - with 3 HP TEFC motor & reducer, 20 RPM output. |
|
132618 |
Marchant Schmit |
Guillotine & Dual Vision System |
in Size Reduction Equipment
|
1
|
|
184,250.00
|
F* |
Dunkirk, NY |
| |
MARCHANT SCHMIT Guillotine w/RITCO Dual Vision In-Line Inspection System
Single head guillotine cutting system w/two ultrasonic cutting knives, infeed v-belt conveyor, transfer conveyor with Ritco dual vision inspection system.
Camera system triggered automatically to inspect product & generates 24 Volt signal if product is out of tolerance, initiates a reject mechanism to remove product from belt.System capable of transmitting production data. Includes Vision System camera, LED lighting, stainless camera enclosure, fixturing & appropriate lighting enclosure. Used at a rate of 90 pieces/min. Used on 7" product & 5" product, each with tolerance of 1/8". |
|
153939 |
Marchant Schmit |
Guillotine & Dual Vision System |
in Size Reduction Equipment
|
1
|
|
184,250.00
|
|
Dunkirk, NY |
| |
MARCHANT SCHMIT Guillotine w/RITCO Dual Vision In-Line Inspection System
Single head guillotine cutting system w/two ultrasonic cutting knives, infeed v-belt conveyor, transfer conveyor with Ritco dual vision inspection system.
Camera system triggered automatically to inspect product & generates 24 Volt signal if product is out of tolerance, initiates a reject mechanism to remove product from belt.System capable of transmitting production data. Includes Vision System camera, LED lighting, stainless camera enclosure, fixturing & appropriate lighting enclosure. Used at a rate of 90 pieces/min. Used on 7" product & 5" product, each with tolerance of 1/8". |
|
156160 |
Marlen |
Opti 220 |
in General Purpose Liquid Pumps
|
1
|
|
|
|
St. Louis, MO |
| |
Marlen Opti 220 Pump
With 40 HP Hydraulic Drive, Model 6312071, Serial #6311022, Frame 286TYZ, RPM 1460/1760. Electrical Rating: 115/230 VAC. Maximum capacity 20,000 lbs./hr. Max Product Pressure = 250 psi. |
|
135921 |
Maxon |
435OP |
in Dryers
|
1
|
|
2,000.00
|
|
Denver, CO |
| |
Maxon OvenPak 435 Burners
3/4 HP Totally Enclosed Blower Motor
Max Capacity 3,500,000 BTU/hr; Minimim Capacity 87,000 BTU/hr.; Minimim natural gas pressure 14" wc; Inlet pipe train size NPT 1.5" - approx. overall envelope dimensions: 42" long x 40" high x 24" wide. Purchased new in 2000 - Never Installed |
|
140642 |
Materials Dev Corp |
AV-150M |
in Valves
|
1
|
|
|
|
Plano, TX |
| |
MDC Vacuum AV-150M 1 1/2" Gate Valve
MDC Vacuum AV-150M 1 1/2" Gate Valve
1 1/2" Gate Valve |
|
98478 |
Mitternight Boiler W |
|
in Tanks
|
1
|
|
|
|
La Porte, TX |
| |
Mitternight 35 gallon 316L tank
Mitternight 35 gallon 316L tank, age 1992, 3 leg supports, 18" diameter, 24" length, 50 psi shell pressure, full vac, shel temp, 250F, vertical, 1/4" wall, dished top and bottom head, serial# 2868, national Board# 1639, LCEC# D88628 |
|
91362 |
Mogul Micro Chem |
MC54A7 |
in Valves
|
1
|
|
200.00
|
F* |
Davenport, IA |
| |
Mogul Micro Chem Chemical Feeder Controller
With (6) electrical plug-in control ports |
|
155566 |
Moyno |
6M2SSR-X |
in General Purpose Liquid Pumps
|
1
|
|
1,500.00
|
|
St. Joseph, MO |
| |
Moyno Pump (color pulse pump) - available August, 2013
Model # 6M2SSR-X - Serial # AS707129S/AS89831-1
400 GPH / 5 GPM |
|
155567 |
Moyno |
6M2SSR-X |
in General Purpose Liquid Pumps
|
1
|
|
1,500.00
|
|
St. Joseph, MO |
| |
Moyno Pump (color pulse pump) - available August, 2013
Model # 6M2SSR-X
400 GPH / 5 GPM |
|
129206 |
Murzan |
|
in Pumps
|
1
|
|
20,000.00
|
|
Burlington, WI |
| |
Murzan Drum Unloader
Used to unload 55 gal drums of crushed tomatoes. 4 stations. |
|
151874 |
Murzan |
TUS-51E |
in General Purpose Liquid Pumps
|
1
|
|
|
|
Fort Smith, AR |
| |
Murzan Pump
Pumped liquid products out of totes with other Murzan pumps in the aseptic kitchen area. Stainless Steel 316L with Non-Porous Wetted Parts. Installed 2009. Decommissioned on October 19, 2012. |
|
118819 |
Nash |
H7 |
in Pumps
|
2
|
|
|
|
La Porte, TX |
| |
Nash Type H Size H7 800cfm Vacuum/Compressor
H7 Compressor 45 psig at 1170 RPM & 250-hp, 800 CFM Free Dry Air, Ductile cast iron and nickel cast iron rotor,Flowserve dual mechanical seals installed
Compressor housing and cones are ductile cast iron and 3%nickel cast iron rotor (Nash Material Code RFA rotor), Shaft is steel with cast iron sleeves. Flowserve seal Assembly no. 06DRX891019. |
|
87705 |
Mitternight Boiler W |
SN3233 |
in Heat Exchangers
|
1
|
|
|
|
Deepwater, NJ |
| |
New, Unused Inconel 600 Heat Exchanger
Heat Exchanger; Manufacturer: Mitternight Boiler Works
Capacity 265 Gal, Length 24'2", diameter 14" Inconel 600 tubes/bonnet/shell. Capacity 265 gal, length 24'2", Dia 14", RT1 stamping, Shell 200FV@650F Tube 200/FV@900F , National Board# 1975 |
|
128056 |
GEA Niro--Soavis |
|
in General Purpose Liquid Pumps
|
3
|
|
|
F* |
Memphis, TN |
| |
Niro- Soavis Positive Displacement Pumps
3 pumps model, NSB5160HA
Stainless Steel homogenizer pumps, max pressure (MPa) 38,Flow(dm3/hr.)
Serial numbers 3891,3892,3893 |
|
123324 |
FEMC |
1219 |
in Food Fillers
|
1
|
|
5,000.00
|
F* |
Gaffney, SC |
| |
One Out Sauce Filler
FEMC Filler
model 1219
sn 6115
This is a one-out volume metric sauce dispenser. This machine dispenses sauce in one shot based on weight desired.
|
|
135740 |
Parsons |
HEM-II |
in Scales, Production Line
|
1
|
|
25,000.00
|
F* |
St. Louis, MO |
| |
Parsons 8 Head Scale - Model HEM-II
With DataTrek Touch Screen - Previously used on Liter Jug Packing Line. |
|
135739 |
Parsons |
EM-4-II |
in Scales, Production Line
|
1
|
|
7,000.00
|
|
St. Louis, MO |
| |
Parsons Triplex EM-4-II Net Weigher
|
|
115990 |
Parsons |
WS-14M |
in Scales, Production Line
|
1
|
|
15,000.00
|
F*R* |
St. Louis, MO |
| |
Parsons-Eagle World Star Scale
Model WS-14M - Serial #8909.2) A 14M should be capable of 100 weighments/min. and a maximum throughput of around 250 lbs/min
Dimensions: 6' wide x 6' long x 6.5' high |
|
150985 |
Paxall |
#WS-14M |
in Scales, Production Line
|
1
|
|
8,000.00
|
|
St. Louis, MO |
| |
Paxall-Parsons Scale
Model #WS-14M - Serial #487P-1
Includes Data-Touch Controller. Used on 3.5 lb. (56 oz.) Jug line. |
|
154400 |
Pulsa |
7120-S-AP |
in General Purpose Liquid Pumps
|
1
|
|
|
|
Chattanooga, TN |
| |
Pulsa Feeder Diaphragm Metering Pump 7120-S-AP
Pulsa Feeder Diaphragm Metering Pump, MODEL 7120-S-AP, with .75 HP Motor (new) |
|
87538 |
Reactor; 50 gal. glass-lined steel |
in Food Processing and Handling Equipment
|
1
|
|
|
|
Belle, WV |
| |
Reactor; 50 gal. glass-lined steel
Pfaudler, ser.# E164-2199; Built 1965. Altered in 1997 by Glassteel, ser.# SO93011.
Design pressure 150 psig at full vacuum. 23" high. Equipped with glass-lined agitator driven by a 2HP motor. |
|
149409 |
Rotex |
A3S9-2S |
in Screens
|
1
|
|
30,000.00
|
|
St. Louis, MO |
| |
Rotex APEX Model A3S9-2S Screener - NEVER INSTALLED
Double deck unit with nominal area of 9 square feet per deck.
Totally enclosed gyratory/reciprocating screener of all metal construction operating with a 2-1/2" positive displacement stroke at 252 RPM. Feed chute, ball tray, box frame, discharge chute and bottom pan are stainless steel, top cover is 304 stainless steel. Side access to screens for ease of inspection and screen changes. Top cover has 6" dia inlet and liftout 10" dia stainless inspection ports. Screen frames are 304 stainless steel. (1) 30" x 42" nominal pretensioned screen panel per level of screening. With 2 HP Motor, 1200 RPM, 3 phase, 60 HZ, 230/460 volt, TEFC. |
| Displaying 1-100 of 153 Page 1 2 |
ALL CATEGORIES
View 
Group Offers into sub-categories 
Tanks - Other