| | Item ID | Photo | Item Description | Description | Microscope Type | Microscp Config | Illum Type | # | Price | Notes | Location |
---|
Make | Model |
---|
| | | | | | | | | | $ | | |
|
964
|
| Bausch & Lomb | MicroZoomII | Microscope Work Station | Upright | Brightfield | Reflected Light |
1
| |
|
|
Scotia, New York |
|
230317
|
| FEI | ExSolve CLM next Gen | Cut samples from wafers | | | |
1
| |
|
|
Malta, New York |
|
230318
|
| FEI | ExSolve CLM next Gen | Cut samples from wafers | | | |
1
| |
|
|
Malta, New York |
|
18582
|
| Melles Griot | 04TFF002 | Fine Focusing Microscope | Upright | | |
3
| |
450.12 |
|
Scotia, New York |
|
3042
|
| Nikon | | Disk Inspection Microscope | Upright | Brightfield | Reflected Light |
1
| |
|
F* |
Scotia, New York |
|
3253
|
| Nikon | None | Disk Inspection Microscope | Upright | Bright & Dark | Reflected Light |
1
| |
|
F* |
Scotia, New York |
|
88258
|
| Olympus | BH2-UMA | Disk Inspection Microscope/Motorized Stage | Upright | Bright/DIC/POL | Reflected Light |
1
| |
|
F* |
Scotia, New York |
|
23995
|
| Vision Engineering | Dynascope | Projection Microscope | | | |
1
| |
|
|
Plano, TX |
|
1974
|
| Zeiss | None | Light Section Microscope | | | |
2
| |
|
|
Scotia, New York |
|
245328
|
| Zeiss | Smartzoom 5 | Zeiss Smartzoom 5 Digital Microscope:Zeiss Smartzoom 5 Digital Microscope - Zeiss Model D Tiltable Stand (G) Item No. 430040-9000-000
- Motorized Z-Drives for Focusing & Pivot Point Adjustment
- Tilting angle ≤ 45°
- Zeiss Smartzoom 5 Optical Engine (G) Item No. 425525-9010-000
- Integrated 10x Zoom
- Integrated Coaxial LED illumination
- Integrated CMOS Camera
- Zeiss 10X Plan Apo D Objective Part No. 435230-9040-000
- NA = 0.6, FWD 10 mm
- Integrated Segmented LED Illumination
- Integrated Data Output on Magnification & Optical Correction Factors
- Zeiss 1.6X Plan Apo Objective
- NA = 0.1, FWD 36 mm
- Integrated Segmented LED Illumination
- Integrated Data Output on Magnification & Optical Correction Factors
- Zeiss Scanning Stage D 130 X 100 STEP Item No. 432038-9000-000
- Stage Flat Surface Area: 310 mm X 223 mm
- XY Travel: 130 mm X 100 mm
- Absolute Accuracy: +/- 5 µm
- Reproducibility: ≤ 1 µm
- Stepper Motor with 4 mm Spindle Pitch
- Integrated Controller
- Interchangeable Stage Inserts: 160 mm X 116 mm
- Metal Stage Insert Included
- Lenovo ThinkCentre All-in-One Control PC for Smartzoom 5 Item No. 432915-9105-000
- Full HD 24” Display & Integrated PC with Windows 10
- 2019 LTSC includes Smartzoom Acquisition
- 2D/3D Measurement & Reporting Software with 3D/EDF (Extended Depth of Focus) Imaging
- 3D/EDF Stitching & Job Mode with Individual Referencing Data, Configuration & System Calibration
|
1
| |
|
|
Santa Cruz, California |
NOTE:
photo available
reference document attached
F* if the item is specially featured
N* if the item is newly added, and/or
R* if the item's price is recently reduced.
|
|