 |
Item ID |
Photo |
Short Description |
Product Type / Details |
#
|
Price |
Notes |
Location |
Make |
Model |
|
|
$ |
|
 |
238954
|
1988 Boat Hull -17Ft long, 4 Foot Beam with Trailer
|
1988 Boat Hull -17Ft long, 4 Foot Beam with Trailer |
in Machine Tools
1988 Boat Hull -17Ft long, 4 Foot Beam with Trailer:1988 Boat Hull -17Ft long, 4 Foot Beam with Trailer No Statement of Condition can be guaranteed. Location: Plaquemine, LA, USA Sold “As Is-Where Is” with no warranties or liabilities. Dow recommends viewing to make your own determination of condition. Bidding closes on 05/31/2023 3:00pm (Sealed Bid) or on Dow’s acceptance of a qualifying bid
|
1
|
|
|
 |
Plaquemine, Louisiana |
|
 |
200554
|
9/8 MAJOR PRICE REDUCTION! Heat Exch/Titanium Limited/ Qty 1/Unused Surplus
|
9/8 MAJOR PRICE REDUCTION! Heat Exch/Titanium Limited/ Qty 1/Unused Surplus |
in Machine Tools
9/8 MAJOR PRICE REDUCTION! Heat Exch/Titanium Limited/ Qty 1/Unused Surplus :Heat Exchanger/Titanium Limited/ Qty 1/Unused Surplus Heat Exchanger, Horizontal, 45.25in ID x 272in OAL, TEMA BJM, Shell 50psig@50/300F, Tube 150psig@50/200F, Titanium Limited, U-Stamped, NB# 524, Shell: 304/304L Stainless Steel, Tubes SB338-2 Titanium Seamless, Heating Surface 4,769sq ft. Year of manufacture: 2009 S/N C2396 Dry weight: 18190 lbs. Drawings available on request HOURS OF OPERATION: 6:30am – 4:00 pm, Mon - Thurs contact: Steven Helm office: 979-238-0923 email: SDHelm@dow.com For viewing Contact Steven Helm between the hours of 6:30 am – 4:00 pm, Mon – Thurs @ 979-238-0923 to set up an appointment Bidding closes on the acceptance of a qualifying bid Posting date 8/27/18 DOW RESERVES THE RIGHT TO REJECT ANY AND/OR ALL BIDS LOAD OUT: This lot will be loaded onto buyer's truck free of charge. Buyer is responsible for securing the load and logistics.
|
1
|
|
|
F* |
Freeport, Texas |
|
 |
105231
|
Airtek
|
Airtek |
TW-130 |
in Machine Tools
AIRTEK HEATLESS DESICCANT AIR DRYER:Heatless Desiccant Air Dryer
|
1
|
|
2,200.59 |
F* |
Scotia, New York |
|
 |
194974
|
Alexanderwerk
|
Alexanderwerk |
BT 120 Pharma |
in Machine Tools
ALEXANDERWERK ROLLER COMPACTOR BENCHTOP:Bench Top Roller Compactor
|
1
|
|
|
F* |
Scotia, New York |
|
 |
195004
|
Alexanderwerk
|
Alexanderwerk |
RFG 150 DA |
in Machine Tools
ALEXANDERWERK ROTOR FINE GRANULATOR UP TO 400 KG HOUR:Rotor Fine Granulator Throughput up to 400 Kg per hour
With SKM/NR gear motor drive.
|
1
|
|
|
F* |
Scotia, New York |
|
 |
232897
|
Applied Materials In
|
Applied Materials In |
0040-62020 |
in Machine Tools
AMAT, 300mm, CMP Retaining Rings:AMAT, 300mm, CMP Retaining Rings
|
1
|
|
|
 |
Malta, New York |
|
 |
158833
|
Autoclave Engineers
|
Autoclave Engineers |
NB196 |
in Machine Tools
AUTOCLAVE ENGINEERS BOLTED CLOSURE PRESSURE VESSEL, 2 LITER:Bolted Closure Pressure Vessel
|
1
|
|
|
F* |
Scotia, New York |
|
 |
215551
|
Autoclave Engineers
|
Autoclave Engineers |
401C-0217 |
in Machine Tools
AUTOCLAVE ENGINEERS ZIPPERCLAVE PRESSURE VESSEL 6.3 LITER:Jacketed Autoclave with 2.0L Teflon Insert.
|
1
|
|
|
 |
Scotia, New York |
|
 |
211558
|
AZCO Corp
|
AZCO Corp |
SM6C |
in Machine Tools
AZCO CUT TO LENGTH ASSEMBLY 0.1MM MIN. LENGTH:Cut to Length Assembly with Unwind/Rewind Stand
|
1
|
|
|
 |
Scotia, New York |
|
 |
233415
|
Brooks
|
Brooks |
MagnaTran 7 |
in Machine Tools
Brooks MagnaTran 7:Used Brooks Automation MagnaTran7 Robot Year of Manufacture unknown
|
1
|
|
|
 |
Villach, Carinthia |
|
 |
180112
|
Hall Tank Co.
|
Hall Tank Co. |
AH-16 |
in Machine Tools
Deaerator Hall Tank Co. :Located in Louisville, KY Hall Tank Co Deaerator Model AH-16 SN 104-91-2 MAX Pressure 30@ 650 Year 1991 Nat’l BD. 284 Never been put in service Contact is Paul Blackburn - PBlackburn@Dow.com Made for Cochrane Environmental Systems
|
1
|
|
|
F* |
Houston, Texas |
|
 |
119626
|
Despatch
|
Despatch |
Equipment Cabinet |
in Machine Tools
DESPATCH POWER SUPPLY CABINET:Burn In Power Supply Rack---Heavy Duty
|
1
|
|
1,200.32 |
 |
Scotia, NY |
|
 |
233414
|
Advanced Thermal Sci
|
Advanced Thermal Sci |
DEX-20A |
in Machine Tools
DEX-20A Temperature Control System:3x Advanced Thermal Siences Temperature Control System DEX-2A
|
3
|
|
|
 |
Villach, Carinthia |
|
 |
239777
|
Hiller GmbH
|
Hiller GmbH |
DP484/11012/FD HILLER DECAPRESS DP |
in Machine Tools
DP484/11012/FD HILLER DECAPRESS DP: - Technic special customized for Infineon? no
- Any damages/deficits known? no
- Manuals existing? yes
- Last time in production/function? 2022
- Any upgrades / extensions? no
- Any consumables at end of lifetime? not known
- Any refurbishments done? no
- Was there a significant system failure in the last three years? no
- Used: only for test
- Any contaminations known? Siliciumdioxid
|
1
|
|
|
N* |
Regensburg, Bavaria |
|
 |
238319
|
CBI
|
CBI |
200-ARRM |
in Machine Tools
ELECTROSTATIC CHUCK RESISTANCE MEASUREMENT TOOL:Electrostatic Chuck Resistance Measurement Tool Axial and Radial Measurement
|
1
|
|
|
 |
Scotia, New York |
|
 |
138226
|
EQUIPMENT CABINET
|
EQUIPMENT CABINET |
in Machine Tools
EQUIPMENT CABINET:Equipment CabinetManufacturer Unknown
|
1
|
|
175.05 |
|
Scotia, NY |
|
 |
224103
|
CBI
|
CBI |
ECJ-200 |
in Machine Tools
ESC CENTERING JIG:Facilitates the centering of the deposition ring to the chuck
|
3
|
|
|
 |
Scotia, New York |
|
 |
221096
|
BESI Holland
|
BESI Holland |
MK-1 |
in Machine Tools
FICO, Auto Mold System (AMS 24) 2p, MK-1:machine is Functioning
|
1
|
|
54,014.47 |
 |
Batam, Riau Islands |
|
 |
233426
|
Genmark Automation
|
Genmark Automation |
Porta300P |
in Machine Tools
Genmark, Porta300P, 2 loadports:Genmark, Porta300P, 2 loadports with some spare parts. See pdf for details.
|
1
|
|
|
 |
Malta, New York |
|
 |
221102
|
BESI
|
BESI |
X-Eye SF160 SL |
in Machine Tools
KETECA, X-Eye SF160 SL, A-SFS16FDAL170N2D735, XRAY:Function , needed motor vacuum to up this machine |
|
1
|
|
22,806.11 |
 |
Batam, Riau Islands |
|
 |
241358
|
LOT SALE - 36" Centrifugal Pump & 6" Trip Valve
|
LOT SALE - 36" Centrifugal Pump & 6" Trip Valve |
in Machine Tools
LOT SALE - 36" Centrifugal Pump & 6" Trip Valve:1 EA - DOW CODE: 10000726605 Centrifugal Pump; HORIZONTAL END SUCTION Details: Centrifugal Pump; Type HORIZONTAL END SUCTION; Pump Size 36 INCH; Stage SINGLE; Body Material 316L STAINLESS STEEL; Rotation CLOCKWISE|COMPLETE WITH PROPELLER, PROPELLER NUT, PACKING BOX, AND MECHANICAL SEAL 1 EA - DOW CODE: 10000727203 Valve;TRIP;6 INCH;600 LB FLANGE Details: Valve; Type TRIP; Size 6 INCH; Connection 600 LB FLANGE; Style REDUCED PORT Condition: sold “AS IS” with no warranties or liabilities. Dow recommends viewing to make your own determination of condition Additional pics upon request LOAD OUT: LOADED ON BUYERS TRANSPORT FREE OF CHARGE HOURS OF OPERATION: 8am-3pm, Mon - Thurs @ Deer Park Texas Plant Bidding closes on the acceptance of a qualifying bid. DOW RESERVES THE RIGHT TO REJECT ANY AND/OR ALL BIDS
|
1
|
lot
|
|
N* |
Deer Park, Texas |
|
 |
184773
|
Orbis
|
Orbis |
FP151 |
in Machine Tools
ORBIS STACK-N-NEST REUSABLE TOTES 22.3" X 13" X 12.8":Stack-N-Nest Totes
Price is for 1 tote. 10 Tote minimum order.
|
2000
|
|
12.00 |
 |
Scotia, New York |
|
 |
195973
|
Pfaudler
|
Pfaudler |
Custom |
in Machine Tools
PFAUDLER TOLAN DOUBLE CONE VACUUM DRYER - HASTELLOY - 24" DIAMETER:Double Cone Vacuum Dryer Hastelloy Construction
Remanufactured by Tolan Machinery
|
1
|
|
|
 |
Scotia, New York |
|
 |
166304
|
Positech
|
Positech |
LA-3030 |
in Machine Tools
POSITECH ERGONOMIC LIFT ASSIST - LODEARM 3030 (LA-3030):Ergonomic Lift Assist
|
1
|
|
|
|
Scotia, NY |
|
 |
241152
|
Reciprocating Gas Compressor Surplus Parts
|
Reciprocating Gas Compressor Surplus Parts |
in Machine Tools
Reciprocating Gas Compressor Surplus Parts:There are over 160 different parts with varying quantities. All parts have been stored in a climate-controlled warehouse. 1 Compressor Crankshaft; M LINE, 6 THROW $251.151.68 12 Compressor Bearing; RECIPROCATING COMPR $138,090.96 4 Compressor Rod; CONNECTING; 13-1/4 IN; $85,714.32 1 Compressor Shoe; CROSSHEAD HEAVY; CS $47,554.84 4 Compressor Valve; POPPET – DISCHARGE $47,554.82 1 Compressor Assembly $47,062.38 1 Compressor Assembly $42,993.20 28 Compressor Valve; POPPET – DISCHARGE $32,321.88 32 Compressor Valve; POPPET – SUCTION $24,480.00 12 Compressor Band; CYLINDER; RYDER/PISTO $17,262.24 1 Compressor Crosshead $14,561.42 1 Compressor Ring; OIL THROWER; 33 INCHES $14,274.38 12 Compressor Ring; 30-1/4 IN; CARBON FIL $13,430.88 6 Compressor Band; CYLINDER; HYDER/PISTO $12,186.12 6 Compressor Packing; ROD; PISTON ROD $11,301.72 4 Compressor Packing; OIL WIPER $11,292.04 24 FILTER, LUB OIL,49H402K5 $8,539.44 1 Compressor Bearing; 18.097 IN; 16.523 $7,590.00 1 Compressor Flange; CAST IRON $5,853.82 8 Compressor Repair Kit; DISCHARGE VALVE $5,694.02 4 Anchor Bolt Assembly; R193 TOP STUD $5,444.00 1 Lubricator Assembly; DRIVE SHAFT; CS $5,384.05 Detail listing of all the spare parts or additional pictures will be provided upon request. Condition: (sold “AS IS” with no warranties or liabilities). Dow recommends viewing to make your own determination of condition and to verify equipment specifications. For viewing Contact Steven Helm between the hours of 6:30 am – 4:00 pm, Mon–Thurs @ 979-238-0923 or sdhelm@dow.com to set up an appointment. Bidding closes on the acceptance of a qualifying sealed bid. LOAD OUT: LOADED ON BUYERS TRANSPORT FREE OF CHARGE DOW RESERVES THE RIGHT TO REJECT ANY AND/OR ALL BIDS
|
1
|
lot
|
|
N* |
Freeport, Texas |
|
 |
237576
|
Red Devil Paint Shaker
|
Red Devil Paint Shaker |
in Machine Tools
Red Devil Paint Shaker:Red Devil twin arm Gallon, Pint, Quart shaker with stand. Model 5400 110v 0-15min timer, tested, works very well. Covers and clamps operate easily and freely. ETL certified
|
1
|
|
2,850.76 |
 |
Kingsport, Tennessee |
|
 |
212091
|
Retsch
|
Retsch |
SR-300 |
in Machine Tools
RETSCH ROTOR BEATER MILL 3000 to 10000 RPM:Rotor Beater Mill with Accessories
|
1
|
|
|
 |
Scotia, New York |
|
 |
138128
|
Rittal
|
Rittal |
1807 |
in Machine Tools
RITTAL EQUIPMENT ENCLOSURE:Equipment Enclosure
|
1
|
|
650.17 |
 |
Scotia, NY |
|
 |
239810
|
Siebec GmbH
|
Siebec GmbH |
P50-52527 |
in Machine Tools
Siebec P50-52527 :Detailed Configuration/Specification of the tool: Filter without pump, Polypropylen, max. 25m³/h Manual existing Originally packed, never used
|
1
|
|
|
N* |
Regensburg, Bavaria |
|
 |
241363
|
SupplyPro Smart Drawer System Heavy Duty Cabinets (8 drawer)
|
SupplyPro Smart Drawer System Heavy Duty Cabinets (8 drawer) |
in Machine Tools
SupplyPro Smart Drawer System Heavy Duty Cabinets (8 drawer):System has the following: - Router
- Storage organizers
- Locking bin system
- Keyboard
- Internet cable
- Card scanner
Has been warehouse kept and gently used (if ever used at all) and is in overall good condition. SmartDrawer - SupplyPro Condition: sold “AS IS” with no warranties or liabilities. Dow recommends viewing to make your own determination of condition. Additional pics on request HOURS OF OPERATION: 8am-3pm, Mon - Thurs; Located @ Deer Park, Texas LOAD OUT: LOADED ON BUYERS TRANSPORT FREE OF CHARGE Bidding closes on the acceptance of a qualifying bid. DOW RESERVES THE RIGHT TO REJECT ANY AND/OR ALL BIDS
|
1
|
|
|
N* |
Deer Park, Texas |
|
 |
239855
|
Surplus KTRON Belt Drive Feeders / Conair Pellet Loader
|
Surplus KTRON Belt Drive Feeders / Conair Pellet Loader |
in Machine Tools
Surplus KTRON Belt Drive Feeders / Conair Pellet Loader:6- KTRON Belt Drive Feeders / Motor Cat. NO. 9473700610 1- Conair Pellet Loader / Model #: 70004204 / Volts: 460/3/60 Condition: (sold “AS IS” with no warranties or liabilities). Dow recommends viewing to make your own determination of condition. HOURS OF OPERATION: 6:30am – 4:00 pm, Mon - Thurs Contact: Steven Helm Office: 979 238-0923 Email: sdhelm@dow.com to set up an appointment for viewing. Additional pics on request. Bidding closes on the acceptance of a qualifying bid. LOAD OUT: LOADED ON BUYERS TRANSPORT FREE OF CHARGE DOW RESERVES THE RIGHT TO REJECT ANY AND/OR ALL BIDS
|
1
|
lot
|
|
 |
Freeport, Texas |
|
 |
240675
|
Surplus PVF Lot Sale
|
Surplus PVF Lot Sale |
in Machine Tools
Surplus PVF Lot Sale:OVER 2500 VARIOUS PIECES OF: TEES, NIPPLES, UNIONS, REDUCERS, TUBES, COUPLINGS & BUSHINGS! NEW, NEVER BEEN USED! STORED IN WAREHOUSE. SEE ATTACHMENT FOR DETAILED LISTING. LOCATED @ LAPORTE, TEXAS Viewing before bidding on an item is encouraged. Bidding Closes upon Dow’s acceptance of a qualifying bid. DOW RESERVES THE RIGHT TO REJECT ANY AND/OR ALL BIDS LOAD OUT: This lot will be loaded onto buyer's truck free of charge. Buyer is responsible for securing the load and logistics.
|
1
|
lot
|
|
N* |
Deer Park, Texas |
|
 |
204309
|
Tel
|
Tel |
Tactrus NCCP |
in Machine Tools
TEL, Tactrus NCCP, 300mm, Etch:TEL, Tactrus NCCP, 300mm, Etch Connected in fab with 2 chms.
|
1
|
|
|
 |
Malta, New York |
|
 |
3279
|
Thoreson Mc Cosh
|
Thoreson Mc Cosh |
TD12 |
in Machine Tools
THORESON PLASTIC PELLET DRYER:Plastic Pellet Dryer
|
1
|
|
|
 |
Scotia, NY |
|
 |
233408
|
Various turbo pumps, Adixen and Agilent
|
Various turbo pumps, Adixen and Agilent |
in Machine Tools
Various turbo pumps, Adixen and Agilent:6 turbo pumps, Adixen and Agilent. Please see pdf for more details.
|
1
|
|
|
 |
East Fishkill, New York |
|
 |
184784
|
Vibra Finish Co.
|
Vibra Finish Co. |
FCV-ULE-2 |
in Machine Tools
VIBRA FINISH VIBRATORY TUMBLER 3 CUBIC FEET CAPACITY:High Energy Vibratory Polishing/Finishing Machine
|
2
|
|
|
F* |
Scotia, New York |
|
|
 |